[RICERCA] Sostituire ONT Nokia su fibra FTTH Infostrada

  • 153 Risposte
  • 95009 Visite

0 Utenti e 1 Visitatore stanno visualizzando questo topic.

Offline mastro1965

  • Membro Giovane
  • **
  • 75
  • Sesso: Maschio
Re:DGA4132 su fibra Infostrada
« Risposta #105 il: 23 Aprile 2019, 13:25 »
allora   è come temevo  autentica  per  loro  è  basata   sul  vendor name  e type vendor  quindi  solo un sfp  nokia potrebbe  funzionare ..
xro   visto che  infostrada  cita   sfp  huawei  devi insistere con  loro  per  fare si che  dalla centrale  olt   ti cambino  il vendor type  in  huawei  e non possono rifiutare  xche  nelle   loro  spiegazioni  di modem  libero e  ont  libero  è  citato  testualmente  il  tipo  in tuo possesso    che  per  ora non  viene  accettato  dall  olt  in centrale  xche  si aspetta  un  nokia ..
nuova  info .. da me  testata su vodafone ..  autentica  è  fatta  solo su  vendor  tipe e   il  numero di pratica ..    in  poche  parole  ho  provato  a cambiare  il seriale  del  ont   con  numero   caso   e  questo  continua ad  andare  ,,se  cambio il numero pratica  questo  si  disconnette ... 
in poche  parole  basta avere  sfp o  ont  esterno  sempre  della stessa  marca   e  il  numero pratica  della  linea    senza  dovere   cambiare  il numero  seriale  dell  ont
a me  adesso  nel tim  hub  manca solo come   mandare  autentica  con  numero pratica  per  far  funzionare  il  mio ont  huawei 
ho trovato   nel  tim  hub  dei file   in cui  c'è  qualcosa  per fare autentica   che viene  usata  per  fastweb .... ( strana  sta  cosa)    /usr/share/transformer/mappings/rpc/optical.inteface.map
« Ultima modifica: 23 Aprile 2019, 13:52 da MisterFTTH »

Offline roleo

  • VIP
  • *****
  • 4601
    • Repository ilpuntotecnico.com
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #106 il: 24 Aprile 2019, 08:42 »
Ho provato a chiamare il servizio clienti e come sempre è stato come buttare un salame nel corridoio.
La gente dall'altra parte non sa di cosa stai parlando.
E alla fine si barricano dietro un: "Le mandiamo un tecnico a controllare che costa 60 €."
Leggendo qua e là mi sembra di aver capito che alcune città hanno dispositivi Nokia/Alcatel mentre altre città hanno Huawei.
Tempo che il "modem libero" per Infostrada sia applicabile solo nelle seconde.

Comunque non mi arrendo.

- EDIT -

Aggiungo info anche se poco utili.
Usando il modulo SFP Technicolor si può utilizzare un comando omccli che dà accesso a molte possibilità di get e set.
Tra le varie cose, aumentando il livello di log e sfilando e reinfilando la fibra:

Codice: [Seleziona]
Receive Interrupt: ONU STATE CHANGE
Receive Interrupt: LINK CHANGE
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
Receive Interrupt: ONU STATE CHANGE
Receive Interrupt: ONU STATE CHANGE
Receive Interrupt: LINK CHANGE
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
Receive Interrupt: LINK CHANGE
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
Receive Interrupt: LINK CHANGE
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
Receive Interrupt: ONU STATE CHANGE
Receive Interrupt: ONU STATE CHANGE
Receive Interrupt: ONU STATE CHANGE
Handling GET msg: class=2, entity=0x0
SingleGet: MibRowToOmciData, class=2, entity=0x0, validSet=0x2, succSet=0x2
OLT reset MIB
Reseting MIB by OLT
MIB_Clear: table Anig
MIB_Clear: table AuthSecMethod
MIB_Clear: table Cardholder
MIB_Clear: table CircuitPack
MIB_Clear: table Dot1RateLimiter
MIB_Clear: table EthExtPmData
MIB_Clear: table EthPmData2
MIB_Clear: table EthPmData3
MIB_Clear: table EthPmDataDs
MIB_Clear: table EthPmDataUs
MIB_Clear: table EthPmHistoryData
MIB_Clear: table EthUni
MIB_Clear: table ExtVlanTagOperCfgData
MIB_Clear: table ExtendedMcastOperProf
MIB_Clear: table FecPmhd
MIB_Clear: table GalEthProf
MIB_Clear: table GemIwTp
MIB_Clear: table GemPortCtp
MIB_Clear: table GpncPmhd
MIB_Clear: table GemPortPmhd
MIB_Clear: table TrafficDescriptor
MIB_Clear: table GeneralPurposeBuffer
MIB_Clear: table GenericStatusPortal
MIB_Clear: table IpHostCfgData
MIB_Clear: table LargeString
MIB_Clear: table LoIdAuth
MIB_Clear: table MacBriPortBriTblData
MIB_Clear: table MacBriPortCfgData
MIB_Clear: table MacBriServProf
MIB_Clear: table MacBridgePortFilterPreassign
MIB_Clear: table MacBridgePortFilterTable
MIB_Clear: table MacBridgePortPmMonitorHistoryData
MIB_Clear: table Map8021pServProf
MIB_Clear: table McastOperProf
MIB_Clear: table McastSubConfInfo
MIB_Clear: table McastSubMonitor
MIB_Clear: table MultiGemIwTp
MIB_Clear: table NetworkAddress
MIB_Clear: table LargeString
MIB_Clear: table OltG
MIB_Clear: table Ont2g
MIB_Clear: table OntData
MIB_Clear: table Ontg
MIB_Clear: table OnuPwrShedding
MIB_Clear: table OnuRemoteDebug
MIB_Clear: table PotsUni
MIB_Clear: table PriQ
MIB_Clear: table SWImage
MIB_Clear: table Scheduler
MIB_Clear: table TR069ManageServer
MIB_Clear: table Tcont
MIB_Clear: table TcpUdpCfgData
MIB_Clear: table ThresholdData1
MIB_Clear: table ThresholdData2
MIB_Clear: table Unig
MIB_Clear: table VEIP
MIB_Clear: table VlanTagFilterData
MIB_Clear: table VlanTagOpCfgData
MIB_Clear: table HW ME350
MIB_Clear: table HW ME370
MIB_Clear: table HW ME373
PON Starting reset MIB
Resetting MIB: ONT data
Resetting MIB: PPTP ETH UNI [0x1,0]
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 11, Entity 0x101, attr 0x4000 value changed indication
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
omci_AvcCallback: Class 11, Entity 0x101, attr 0x10 value changed indication
Receive Interrupt: LINK CHANGE
Instance not found in mib_alarm_table_get: EthUni, 0x101
Get alarm table fail: EthUni, 0x101
Alarm handler returns fail: EthUni
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: Priority queue [0x1,0]
Resetting MIB: UNI-G [0x1,0]
Resetting MIB: T-CONT [0]
Resetting MIB: Traffic scheduler [0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: Priority queue [0,0]
Resetting MIB: T-CONT [1]
Resetting MIB: Traffic scheduler [1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: Priority queue [0,0x1]
Resetting MIB: T-CONT [2]
Resetting MIB: Traffic scheduler [2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Receive Interrupt: LINK CHANGE
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 11, Entity 0x101, attr 0x400 value changed indication
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: Priority queue [0,0x2]
Resetting MIB: T-CONT [3]
Resetting MIB: Traffic scheduler [3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: Priority queue [0,0x3]
Resetting MIB: T-CONT [4]
Resetting MIB: Traffic scheduler [4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: Priority queue [0,0x4]
Resetting MIB: T-CONT [5]
Resetting MIB: Traffic scheduler [5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: Priority queue [0,0x5]
Resetting MIB: T-CONT [6]
Resetting MIB: Traffic scheduler [6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: Priority queue [0,0x6]
Resetting MIB: T-CONT [7]
Resetting MIB: Traffic scheduler [7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: Priority queue [0,0x7]
Resetting MIB: ANI-G [0]
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 263, Entity 0x8001, attr 0x100 value changed indication
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
Resetting MIB: Cardholder & Circuit pack [1]
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 5, Entity 0x101, attr 0x8000 value changed indication
omci_AvcCallback: Class 5, Entity 0x101, attr 0x800 value changed indication
omci_AvcCallback: Class 5, Entity 0x101, attr 0x100 value changed indication
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 6, Entity 0x101, attr 0x200 value changed indication
Resetting MIB: Cardholder & Circuit pack [0]
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 5, Entity 0x180, attr 0x8000 value changed indication
omci_AvcCallback: Class 5, Entity 0x180, attr 0x800 value changed indication
omci_AvcCallback: Class 5, Entity 0x180, attr 0x100 value changed indication
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 6, Entity 0x180, attr 0x200 value changed indication
Resetting MIB: ONT-G & ONT2-G
Instance not found in omci_is_notify_suppressed_by_circuitpack: Ontg, 0x0
omci_AvcCallback: Class 256, Entity 0x0, attr 0x100 value changed indication
omci_AvcCallback: Class 256, Entity 0x0, attr 0x40 value changed indication
omci_AvcCallback: Class 256, Entity 0x0, attr 0x20 value changed indication
omci_AvcCallback: Class 257, Entity 0x0, attr 0x4000 value changed indication
Resetting MIB: Software image
omci_AvcCallback: Class 7, Entity 0x0, attr 0x8000 value changed indication
omci_AvcCallback: Class 7, Entity 0x0, attr 0x4000 value changed indication
omci_AvcCallback: Class 7, Entity 0x0, attr 0x2000 value changed indication
omci_AvcCallback: Class 7, Entity 0x0, attr 0x1000 value changed indication
omci_AvcCallback: Class 7, Entity 0x0, attr 0x800 value changed indication
omci_AvcCallback: Class 7, Entity 0x0, attr 0x400 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x8000 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x4000 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x2000 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x1000 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x800 value changed indication
omci_AvcCallback: Class 7, Entity 0x1, attr 0x400 value changed indication
Resetting MIB: OLT-G
Resetting MIB: BBF TR-069 management server
Resetting MIB: IP host config data
omci_AvcCallback: Class 134, Entity 0x0, attr 0x80 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x40 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x20 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x10 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x8 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x4 value changed indication
omci_AvcCallback: Class 134, Entity 0x0, attr 0x2 value changed indication
Resetting LOID MIB
Resetting MIB: ONU remote debug
Resetting MIB: ONU power shedding
omci_AvcCallback: Class 133, Entity 0x0, attr 0x20 value changed indication
Resetting MIB: me370
Resetting MIB: me350
Resetting MIB: me373
Resetting MIB: RegistrationInfo
[ERR] Warning, unknown dir name: OMCI_ONT_VER
[ERR] Warning, unknown dir name: OMCI_VENDOR_ID
[ERR] Warning, unknown dir name: OMCI_TM_OPT
[ERR] Warning, unknown dir name: OMCC_VER
[ERR] Warning, unknown dir name: OMCI_EQID
[ERR] Warning, unknown dir name: OMCI_SW_VER1
[ERR] Warning, unknown dir name: OMCI_SW_VER2
Handling GET msg: class=131, entity=0x0
SingleGet: MibRowToOmciData, class=131, entity=0x0, validSet=0x2, succSet=0x2
Start MIB Upload
MIB_CreateSnapshot: TableId 1
MIB_CreateSnapshot: TableId 2
MIB_CreateSnapshot: TableId 3
MIB_CreateSnapshot: TableId 4
MIB_CreateSnapshot: TableId 5
MIB_CreateSnapshot: TableId 6
MIB_CreateSnapshot: TableId 7
MIB_CreateSnapshot: TableId 8
MIB_CreateSnapshot: TableId 9
MIB_CreateSnapshot: TableId 10
MIB_CreateSnapshot: TableId 11
MIB_CreateSnapshot: TableId 12
MIB_CreateSnapshot: TableId 13
MIB_CreateSnapshot: TableId 14
MIB_CreateSnapshot: TableId 15
MIB_CreateSnapshot: TableId 16
MIB_CreateSnapshot: TableId 17
MIB_CreateSnapshot: TableId 18
MIB_CreateSnapshot: TableId 19
MIB_CreateSnapshot: TableId 20
MIB_CreateSnapshot: TableId 21
MIB_CreateSnapshot: TableId 22
MIB_CreateSnapshot: TableId 23
MIB_CreateSnapshot: TableId 24
MIB_CreateSnapshot: TableId 25
MIB_CreateSnapshot: TableId 26
MIB_CreateSnapshot: TableId 27
MIB_CreateSnapshot: TableId 28
MIB_CreateSnapshot: TableId 29
MIB_CreateSnapshot: TableId 30
MIB_CreateSnapshot: TableId 31
MIB_CreateSnapshot: TableId 32
MIB_CreateSnapshot: TableId 33
MIB_CreateSnapshot: TableId 34
MIB_CreateSnapshot: TableId 35
MIB_CreateSnapshot: TableId 36
MIB_CreateSnapshot: TableId 37
MIB_CreateSnapshot: TableId 38
MIB_CreateSnapshot: TableId 39
MIB_CreateSnapshot: TableId 40
MIB_CreateSnapshot: TableId 41
MIB_CreateSnapshot: TableId 42
MIB_CreateSnapshot: TableId 43
MIB_CreateSnapshot: TableId 44
MIB_CreateSnapshot: TableId 45
MIB_CreateSnapshot: TableId 46
MIB_CreateSnapshot: TableId 47
MIB_CreateSnapshot: TableId 50
MIB_CreateSnapshot: TableId 51
MIB_CreateSnapshot: TableId 52
MIB_CreateSnapshot: TableId 53
MIB_CreateSnapshot: TableId 54
MIB_CreateSnapshot: TableId 55
MIB_CreateSnapshot: TableId 56
MIB_CreateSnapshot: TableId 57
MIB_CreateSnapshot: TableId 58
MIB_CreateSnapshot: TableId 59
MIB_CreateSnapshot: TableId 60
MIB_CreateSnapshot: TableId 61
MIB_CreateSnapshot: TableId 62
MIB_CreateSnapshot: TableId 63

# Terminate(done) MIB Upload
Receive operation on unknown me, cmd = 9, me = 287, inst = 0

« Ultima modifica: 24 Aprile 2019, 19:53 da roleo »
--- SONO TUTTI OPEN CON IL SOURCE DEGLI ALTRI ---

Non rispondo in pm a tutte quelle domande che hanno una risposta nel forum.
Usate il pulsante "Ricerca".

Offline nclmrc

  • Membro Anziano
  • ***
  • 246
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #107 il: 24 Aprile 2019, 23:11 »
Io penso che tutto il problema stia nella configurazione della tua porta virtuale configurata nell'olt. Dovrebbe essere riconfigurata da veip ad uni.

Offline freddy0h

  • Membro Anziano
  • ***
  • 174
  • asd
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #108 il: 07 Maggio 2019, 17:47 »
avete news? in questi giorni ho provato a cambiare l'ont nokia con un hg8010h (preso su ebay), ho cambiato serial number e messo la pon password ma niente, il huawei rimane in O5 e l'olt non gli fornisce la configurazione. sto provando sotto rete tim.
@roleo hai qualche modo per cambiare il vendor?
« Ultima modifica: 07 Maggio 2019, 20:01 da freddy0h »
asd.
TG789vac2 - root 17.3
Tim HUB - root 17.3
AGTEF - root 17.3

Offline LuKePicci

  • Global Moderator
  • VIP
  • *****
  • 2789
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #109 il: 07 Maggio 2019, 18:27 »
Hai provato con LOID+Password? https://imgur.com/a/yWYWByM

Offline MisterFTTH

  • Global Moderator
  • Esperto
  • *****
  • 949
  • Sesso: Maschio
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #110 il: 07 Maggio 2019, 18:35 »
ho cambiato serial number e messo la pon password dell'sfp

La configurazione TIM non prevede la pwd.

Per il resto a naso mi vien da pensare che tu sia sotto OLT Nokia/ALU e la interoperabilità con l'ONT HUA non è garantita, il cambio vendor potrebbe essere una ipotesti di lavoro.

La discussione prosegue nell'altro topic https://www.ilpuntotecnico.com/forum/index.php/topic,80779.msg250517.html
Netiquette del Forum

Offline roleo

  • VIP
  • *****
  • 4601
    • Repository ilpuntotecnico.com
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #111 il: 08 Maggio 2019, 09:08 »
@roleo hai qualche modo per cambiare il vendor?

Sono riuscito a cambiare il vendor solo sul modulo SFP di TIM/Technicolor.
Per il resto sono fermo.
Non ho capito bene qual è la tua situazione, per ricapitolare io sono su FTTH Wind/Infostrada con ONT Nokia G-240W-B.
Vorrei mettere l'AGTHP e possiedo il modulo SFP TIM/Technicolor e il modulo SFP Huawei MA5671A.
Fatte mille prove senza successo.
Per quanto riguarda la mia situazione, ritengo che l'ipotesi di MisterFTTH sia la più probabile:

Per il resto a naso mi vien da pensare che tu sia sotto OLT Nokia/ALU e la interoperabilità con l'ONT HUA non è garantita, il cambio vendor potrebbe essere una ipotesti di lavoro.
--- SONO TUTTI OPEN CON IL SOURCE DEGLI ALTRI ---

Non rispondo in pm a tutte quelle domande che hanno una risposta nel forum.
Usate il pulsante "Ricerca".

Offline freddy0h

  • Membro Anziano
  • ***
  • 174
  • asd
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #112 il: 08 Maggio 2019, 13:44 »
@roleo infostrada stai sotto openfiber o flashfiber? (penso open)
stai usando un ont esterno ora e vuoi usare un modulo sfp nel tim hub?
asd.
TG789vac2 - root 17.3
Tim HUB - root 17.3
AGTEF - root 17.3

Offline roleo

  • VIP
  • *****
  • 4601
    • Repository ilpuntotecnico.com
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #113 il: 08 Maggio 2019, 13:59 »
Sono con Openfiber e sto usando il modem in dotazione Nokia Alcatel G-240W-B con ottica integrata.
Vorrei usare il tim hub con modulo SFP.
--- SONO TUTTI OPEN CON IL SOURCE DEGLI ALTRI ---

Non rispondo in pm a tutte quelle domande che hanno una risposta nel forum.
Usate il pulsante "Ricerca".

Offline freddy0h

  • Membro Anziano
  • ***
  • 174
  • asd
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #114 il: 08 Maggio 2019, 20:55 »
@roleo il fatto è questo, in centrale ti hanno assegnato all'olt nokia, quindi o trovi un modulo sfp compatibile con l'olt nokia (quindi 3rdy party olts) oppure chiami il gestore e cerchi una soluzione.
penso che guardando le specs dei vari moduli sfp puoi trovare se sono compatibili con olt nokia.

https://www.aliexpress.com/item/Alcatel-Lucent-S-GPON-OLT-transceiver-SFP-C-MODULES-PTB38JO-6537E-SC-PC-KAO/32806126810.html toh
se riesci a cambiare sn questo funziona 99% perche' l'olt e' nokia\alcatel quindi dovrebbe andare bene l'auth (sto ipotizzando, ma se hai veramente l'olt alc\nokia, pochi ont supportano alc come olt, neanche ubiquiti ufiber nano lo supporta  :sonno:).
« Ultima modifica: 08 Maggio 2019, 21:07 da freddy0h »
asd.
TG789vac2 - root 17.3
Tim HUB - root 17.3
AGTEF - root 17.3

Offline roleo

  • VIP
  • *****
  • 4601
    • Repository ilpuntotecnico.com
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #115 il: 09 Maggio 2019, 08:41 »
L'ennesimo esempio di come va in Italia.
Wind salva la faccia dicendo che si può fare:
https://www.wind.it/faq/modem/installazione-e-info-modem/posso-utilizzare-qualsiasi-modem/
e la realtà è un'altra.
--- SONO TUTTI OPEN CON IL SOURCE DEGLI ALTRI ---

Non rispondo in pm a tutte quelle domande che hanno una risposta nel forum.
Usate il pulsante "Ricerca".

Offline freddy0h

  • Membro Anziano
  • ***
  • 174
  • asd
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #116 il: 09 Maggio 2019, 16:05 »
@roleo quella guida va benissimo, la tua sfortuna e' rientrare nel caso in cui l'ont non è quello huawei, quindi è nokia (andando a rigor di logica) e nessun ONT se non quelli di nokia, supportano OLT nokia. quindi se vuoi risolvere comprati da aliexpress quel modulo.
asd.
TG789vac2 - root 17.3
Tim HUB - root 17.3
AGTEF - root 17.3

Offline roleo

  • VIP
  • *****
  • 4601
    • Repository ilpuntotecnico.com
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #117 il: 09 Maggio 2019, 17:37 »
Come dici tu, la guida va bene per chi ha OLT Huawei.
Ciò non toglie che il modem libero non esiste.
Nell'ignoranza di un utente medio, leggo piacevolmente quell'articolo, spendo 50 € per comprare un SFP Huawei e poi lo uso come soprammobile.
Risultato: il modem è sempre il loro e io ho 50 € in meno nel portafoglio.
L'articolo doveva specificare che il modem libero è possibile solo per alcuni utenti, ma chiaramente loro non ci tengono a scriverlo.
Oppure dovevano aggiungere una sezione indicando di acquistare un SFP Nokia/Alcatel.

Il modulo che mi hai indicato mi sembra per OLT e non per ONT.
--- SONO TUTTI OPEN CON IL SOURCE DEGLI ALTRI ---

Non rispondo in pm a tutte quelle domande che hanno una risposta nel forum.
Usate il pulsante "Ricerca".

Offline freddy0h

  • Membro Anziano
  • ***
  • 174
  • asd
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #118 il: 09 Maggio 2019, 17:40 »
stanno sostituendo tutti gli olt con huawei, per questo e' solo per huawei la guida, comunque se chiami wind e ti appelli al modem libero, gratuitamente ti mettono il loro ONT che ha uscita eth.
detto questo, io ancora non ho capito se il modem libero si applica solo al modem o anche alla terminazione ottica e se l'ISP è tenuto a poter farmelo cambiare o altro..

comunque tim neanche una pagina del genere ha, almeno sulla guida per il modem libero wind cita l'ont e cosa mettere al posto del loro.
« Ultima modifica: 09 Maggio 2019, 18:00 da freddy0h »
asd.
TG789vac2 - root 17.3
Tim HUB - root 17.3
AGTEF - root 17.3

Offline LuKePicci

  • Global Moderator
  • VIP
  • *****
  • 2789
Re:DGA4132 su fibra FTTH Infostrada
« Risposta #119 il: 09 Maggio 2019, 18:31 »
@roleo Ho letto quella pagina, è alquanto ambigua. Ora provo ad analizzare il testo attaccandomi pedissequamente a quanto scritto per trovarci un senso che non contrasti con la realtà, lungi da me è qualsiasi intenzione di difenderli.
Potrebbe voler dire che nel caso in cui tu scelga un'offerta senza modem (in partenza però) allora loro ti fornirebbero e configurerebbero un huawei. Quell'"eventualmente" mi lascia perplesso, ma in realtà non c'è scritto da nessuna parte che se ne compri uno uguale e lo metti su una linea con offerta che include modem questo funzioni. La parte relativa alla non garanzia di funzionamento di altri modelli potrebbe riferirsi poi alla tua volontà di voler sostituire l'sfp che ti forniscono con uno differente.
Insomma la loro interpretazione al "modem libero" potrebbe essere fatta per funzionare solo partendo da un piano che non prevede modem, o per chi riceve uno dei nuovi device con porta sfp.

@freddy0h la delibera anche se viene comunemente chiamata "modem libero" ovviamente non ha come target il modem nel vero senso del termine, per fortuna, altrimenti per le ftth non ne staremmo nemmeno a parlare dato che di modem non ne servono (quello nokia di roleo forse non ha nemmeno il modem), ma del CPE, ovvero il gateway che l'operatore piazza in casa tua. Il problema è che la tecnologia prevede mille modi diversi di fare le stesse cose, e le leggi per quanto generiche in qualche modo sono sempre aggirabili. Proprio in questo thread si è discusso del fatto che questi "moduli adattatori", come li chiama wind, sono in effetti dei computer completi non meno di quanto lo siano i gateway. Ciononostante nessuno si sognerà mai di far partire una campagna per liberalizzare il modulo SFP, dato che la gente, e i produttori in appoggio al "modem libero" volevano solo poter comprare e vendere quelli che vengono comunemente percepiti come "modem meno castrati con un wifi più potente". Quindi se ti stai chiedendo esattamente se un certo aggeggio debba o meno essere sostituibile in base a quella delibera secondo me ti basta rispondere alla domanda: alla gente comune e ai produttori terzi di hardware consumer, importa che siano sostituibili dall'utente andando a creare un mercato profittevole?