Hardware e Software > Connessioni ADSL/VDSL/FTTC
Is There Any Hope......
marven:
--- Citazione ---Thanks again...
--- Termina citazione ---
You are welcome! :D
--- Citazione ---The link is not working I'm afraid.
--- Termina citazione ---
I tried it just now, it's working...
--- Citazione ---So isn't there any solution for the new modem...why will the flash not be erased ?
--- Termina citazione ---
My hypothesis are:
The worst ones:
1) The flashrom or some other hardware component is broken;
2) Adam2 is corrupt and doesn't work properly;
In these condition the serial adapter is useless... maybe an extreme hope with the serial adapter for the hypothesis 2)
The best ones:
1) The power supply adapter has some problem, try another;
2) You could solve the problem via serial adapter, perhaps with the "erase" command...
3) You could access the modem via telnet.
If you can telnet the modem ad get a shell prompt, because in this condition the flashing software is completly different from adam2, there's a last chance to flash kernel, filesystem, env partition and even adam2 in case...
At the command prompt put the following command:
telnet 192.168.1.1
then enter
root
as login
and your web configuration page password
if everything will go well you'll get a screen like this one:
--- Citazione ---BusyBox v1.00 (2005.02.14-19:59+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
--- Termina citazione ---
I'll post you the commands to put kernel, filesystem etc. ;)
SilverDesertRain:
Thanks again, Marven...you sure are good :D
Ok now some background history....This is the 3rd D-Link 302T that I have messed up. The first one is dead with Adam trapped inside. The second one I messed it up by trying the recovery tool to upgrade it to 500T (as I did for the first one) but it failed because it is from the same new breed as the 3rd modem. Anyway the second modem went back to the shop and they replaced me a new one, the 3rd modem (Was still under the Waranty)
Now the 3rd modem did exactly what the 2nd modem did but I still have not taken it to the shop (Still under waranty, one whole year). But the thing is that 4th modem will be the same...so I took it as a challenge to fix the 3rd modem. In the end if I fail...I'll take it back and hopefully they will replace it for a new one.
The thing is with the first one it was easily upgraded with all...telnet, FTP, Recovery tool and CICLaMaB but the new ones are avoiding upgrade...now why will this be.
I'm sure D-Link have done something to the new ones...but there is alway a way as long as a person can think.
I sure have learn a lot...thanks to kind and helpful people like yourself.
Now for the solutions....ok I still have the old power supply from the old one (It's a bit different from the new ones though). Also the old one had a USB driver version 1 while the new ones have version 2 on the installation CD.
As for the link...it works but I have to use a proxy server (blocked by my ISP for some reason)
Thanks again.
marven:
--- Citazione ---I'm sure D-Link have done something to the new ones...
--- Termina citazione ---
Very interesting news. I never heard it before... perhaps D-Link doesn't sell them in Italy... To say the truth D-Link doesn't sell the 302t at all in Italy, we get it from Telecom
Italia with the adsl line or from Ebay (branded Telecom Italia the same ...)
BTW, just for curiosity, may I ask where are you from? Just to also know where the 302t is directly selled by D-Link...
marven:
Opps... forgot to say there's a very last resort in order to put your modem alive: the JTAG port. I'm hacking about it on my dead 302t...
I didn't revived my modem for the moment but I get very interesting results...
I'll put schematics and so very soon on this thread:
https://www.ilpuntotecnico.com/forum/i...p?showtopic=779
By the way I saw (via jtag) that it's possible to protect some flash rom sectors. On mine there aren't, perhaps on yours there are.
SilverDesertRain:
Thanks Marven,
I am from a country called Oman, which is next to Dubai. Dubai is the main distributer for D-Link ADSL in the Middle East, The Gulf Region.
J-Tag sounds interesting but I am not electronic oriented...you see I am a surgeon by profession.
Thanks again.
Navigazione
[0] Indice dei post
Vai alla versione completa