Hardware e Software > Connessioni ADSL/VDSL/FTTC
Problemi Con 300t
kyxx:
ciao gigiowind,
ho un po' di problemi..
mi indicheresti passo passo come hai fatto l'upgrade?
i 3 file si caricano sul 300T con il recovery tool? dove trovo quest'ultimo? il link indicato dal forum non funziona più.
thanks
kyxx
ArTiKO:
Vi posto la risposta del ragazzo russo:
> hi!
> I have use your version 300t@500t, but this version don't have support of
> USB port, right?
Company D-Link sells in Russia devices DSL-xxxT without support USB, it officially, therefore in our
firmwares there is no setup and work USB...
> in your archive RAR have two fs (firmware image):
> - DLinkRU_DSL-500T_fs_V1.00B02T02.RU.20041224.MC.00_dsp1010000
> - DLinkRU_DSL-500T_fs_V1.00B02T02.RU.20041224.MC.00_dsp3000800
>
> why?
These firmwares differ only different versions DSP HAL firmware, it is necessary for the decision
of a problem of the part connected in work ADSL. DSP1010000 - the old version also is intended for
work with old DSLAM modems, support only ADSL v.1. DSP3000800 - works with new DSLAM modems
and supports ADSL2/2+. Unfortunately c DSP3 there are problems with old DSLAM devices, just as
with DSP1 at connection to new DSLAM to devices. Therefore to have to do 2 versions fs_images...
> this firmware have usb support?
Support USB to make not difficultly, the problem can be only in adjustments, it will be necessary to study
such opportunity in ours firmwares, driver USB and necessary web pages can be taken from UK firmware.
> I'm Mattia.
> I have found this link for resolv router and emule problems.
> http://www.adslzone.net/html.php?file=tuto...rs/14/index.htm
>
> Can you set this var into the firmware:
>
> echo 2048 > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
> echo 50 > /proc/sys/net/ipv4/netfilter/ip_conntrack_generic_timeout
> echo 5 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_close
> echo 120 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_close_wait
> echo 1200 >
> /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
> echo 120 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_fin_wait
> echo 60 > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_time_wait
> echo 10 > /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout
>
> this var resolv the problems with emule... Did you just know?
Yes... It at us for a long time mades up:)...
M74T:
Grazie 1000 artiko :lol:
Lo immaginavo infatti sul mio 504t eMule stà girando alla grande orami da 2 gg, l'ho impostato su 300 connessioni.
Ora sto preparando una guida e una raccolta di vari firmware :D
M74T:
Scusami artiko dimenticavo ...
Ma esiste un forum inglese ?
Io li trovo tutti Russi :(
Patry83:
mmmh...ho capito poco sui 2 firmware del russo...io ho messo su il DSP3 ecc...
e mi funziona bene...l'unico probl è che quando stacco l'alimentazione del modem mi perde l'ora...ma fa niente...
il DSP1? è meglio/peggio?
cosa mi consigliate?
nn dite di mettere i files del 502t perchè nn mi va di usare una versione che supporta l'USB quando io nel mio 300t nn ho porte USB... :)
aspetto risposte...e possibilmente spiegazioni in italiano :D sulla differenza tra i 2 firmware
Navigazione
[0] Indice dei post
Vai alla versione completa