ciao a tutti
Ho per le mani un alice dialface AGIB che non vā , pare avviarsi ma poi le spie diventano tutte rosse e poi si spengono.
Non riesco a colelgarmi via browser allora ho seguito questo thread
https://www.ilpuntotecnico.com/forum/index.php/topic,9480.0.html e mi sono collegato col jtag tramite putty.
In pratica il router sembra riavviarsi di continuo
questo č il log di putty
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.02.04 14:45:36 =~=~=~=~=~=~=~=~=~=~=~=
Version 1.0.1
Read EEPROM
Jump to Flash
Version 1.0.1
Read EEPROM
Jump to Flash
Head : Amazon Version 1.0.0
DRAM: 16 MB
Head : relocate_code start
Head: relocate code finish.
Image Name: u-boot image
Image Type: MIPS Linux Firmware (lzma compressed)
Data Size: 40668 Bytes = 39.7 kB
Load Address: 80100000
Entry Point: 80100000
Disabling all the interrupts
Uncompressing UBoot Image ...
Uncompression completed successfully with destLen 124144.
Head: Jumping to u-boot in the ram at 0x80100000
Infineon Amazon
U-Boot 2.0.16-16 (Mar 30 2007 - 09:11:18)
In env_init : env_ptr = 0xb37c0000
For enviornment CRC32 is OK
Board: AMAZON Yangtse Version, Chip V1.3, CPU Speed 235 MHz
IDF LED fix ... done
DRAM: 16 MB
USB support: 48Mhz clock enabled
relocate_code start
relocate code finish
Entering flash_init()
detected SPANSION S29GL064A
IDF-FLASH fix...done
Flash: 8 MB
env_relocate[228] malloced ENV at 80aa0008
Initialize devices...
In: serial
Out: serial
Err: serial
Net: AMAZON Switch
Type "run flash_nfs" to mount root filesystem over NFS
Press enter key to stop autoboot: 2 1 0
getting active image...
active image seems to be 0
## Booting image at b3020094 ...
Image Name: openrg_AGIB_1.2.1
Created: 2008-03-26 17:48:43 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 2626643 Bytes = 2.5 MB
Load Address: 80002000
Entry Point: 80003d50
Verifying Checksum ... OK
Uncompressing Kernel Image ... Uncompression time : 1074557/117500000
Uncompression length is 4083712
OK
Starting kernel ...
Yangtse Version
Dopodichč riparte da zero indefinitamente.
Ho provato anche a resettarlo inviando il comando
erase B3760000 B379FFFF
ma riparte sempre di continuo.
E' recuperabile o lo butto via?
