[barribar]

hi all
I have alice gate voip 2 plus wifi that I want to setup (I have just BRIDGED no ROUTED)
I want to use with my ADSL service and wifi



anyone can help a newbies
thank you

[gabnik]

hi all
I have alice gate voip 2 plus wifi that I want to setup (I have just BRIDGED no ROUTED)
I want to use with my ADSL service and wifi



anyone can help a newbies
thank you

Hi, what is your ISP. There are 2 different version of Alice Gate VoIP 2 Plus Wi-Fi.
AGIF= Dial Face Factory
AGPF= Pirelli Factory
so if you have an AGIF you will set this with the serial console
if you have an AGPF you set with the wto pin for the serial.

[barribar]

Hi, what is your ISP. There are 2 different version of Alice Gate VoIP 2 Plus Wi-Fi.
AGIF= Dial Face Factory
AGPF= Pirelli Factory
so if you have an AGIF you will set this with the serial console
if you have an AGPF you set with the wto pin for the serial.

thank you for your reply
I downloaded another file DISCUS and now I have Bridged + ROUTED
but I can not connect (see pic)
Can you help me please ?

[gabnik]

thank you for your reply
I downloaded another file DISCUS and now I have Bridged + ROUTED
but I can not connect (see pic)
Can you help me please ?

What your ISP (Internet Provider)? The Telegestione is the TR069, Telecom uses this protocol for upgrade the devices. So, you will do not the flag on TR069. The telnet is enable on the router? For the telnet WIN+R and telnet 192.168.1.1 the user and password are admin. Before disable the TR069 you will check that telnet is enable on the router. How do you access to the advacend menu?

[barribar]

What your ISP (Internet Provider)? The Telegestione is the TR069, Telecom uses this protocol for upgrade the devices. So, you will do not the flag on TR069. The telnet is enable on the router? For the telnet WIN+R and telnet 192.168.1.1 the user and password are admin. Before disable the TR069 you will check that telnet is enable on the router. How do you access to the advacend menu?

the TR-069 is not  enabled




I can telnet 192.168.1.1 with user and pass (admin)
I can access to the advanced menu with
http://192.168.1.1/admin.html

my ISP is foreigner provider
The problem I can access the network with my pc see pic


but I want that router can access the network without my pc and I can use my wifi

here is my Network Connections



thank you

[gabnik]

For enable telnet: download the discus from the router and open it with a text editor (Wordpad, Textedit...) and find this:
(telnets
     (disabled(1))
     (ports

You change it with:

(telnets
     (disabled(0))
     (ports

Upload the new file in the router and wait the reboot

Now the telnet is enabled on the router: WIN+R --> telnet 192.168.1.1

Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0
conf reconf 1

Your ISP is PPPOE or PPOA?

[barribar]

For enable telnet: download the discus from the router and open it with a text editor (Wordpad, Textedit...) and find this:
(telnets
     (disabled(1))
     (ports

You change it with:

(telnets
     (disabled(0))
     (ports

Upload the new file in the router and wait the reboot

Now the telnet is enabled on the router: WIN+R --> telnet 192.168.1.1

Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0
conf reconf 1

Your ISP is PPPOE or PPOA?

ok for set /cwmp/enabled 0
my ISP is PPPOE

[gabnik]

ok for set /cwmp/enabled 0
my ISP is PPPOE

Ok. You configured the new connection of your ISP in the router?

[barribar]

Ok. You configured the new connection of your ISP in the router?

yes I think
with quick setup see pic

[gabnik]

now maintain active the connection: download the discus and find this

(ppp2
      (enabled(0))
      .
      .

change it with:

(ppp2
      (enabled(1))
      .
      .

[gabnik]

now upload the new discus in the router.

[barribar]

now maintain active the connection: download the discus and find this

(ppp2
      (enabled(0))
      .
      .

change it with:

(ppp2
      (enabled(1))
      .
      .

Ok I changed 0 to 1 and I uplaoded into router
but when the router restart I see that PPP2 become 0

(ppp2
      (enabled(0))
      (logical_network(1))

[gabnik]

Ok I changed 0 to 1 and I uplaoded into router
but when the router restart I see that PPP2 become 0

(ppp2
      (enabled(0))
      (logical_network(1))

Please post an image of the Connection Wizard

[barribar]

Please post an image of the Connection Wizard

look here













do I have to change this user and password in Bridged Properties>PPP>Login User Name and Login Password  Like here :

[gabnik]

Click Network Connections, all the connections, the maps and post the image please.