IlPuntoTecnico
Hardware e Software => Connessioni FTTH/FTTdp => Topic aperto da: osdneh - 08 Settembre 2022, 14:05
-
Hello
I have AFM0002TIM with software version: V1_7_8_181123.
I need to set gpon ploam password in hex format as I have 0 at start. Do you know if hex support exists in newer firmware (1_7_8_210412 or newer)
diag shell:
diag > gpon get password-hex command
Where can I find a new version ? If someone has this SFP, is it possible to dump /dev/mtd4 (kernel) & /dev/mtd5 (rootfs) ?
Regards