IlPuntoTecnico
Presentazioni => Presentazione -OBBLIGATORIA- per i Nuovi Iscritti => Topic aperto da: ledufakademy - 22 Maggio 2019, 22:25
-
hello i m new here and need help with AGTEF_1.1.1 on my dga4130, thank.
sorry i can't speak italiano (just french and a beat of english)
hello, i don't speak italiano, sorry.
i need help because ansuel AGTEF_1.1.1_closed.rbi :'(
kill my ssh access.
is there a way to reopen ssh acces ???
i buy a DGA4130 with aqua 16.3 release, i do the hack with webgui injection, gain access to ssh (cool !!!)
And decide to user your tool autoflashgui.exe with AGTEF_1.1.1_CLOSED.rbi ...
in order to put your GUI.tar ... accessing full webgu ioption ....
But now webgui is the same with AGTEF 1.1.1 firmware , ok but : no ssh , can't replay webgu injection : box is closed.
What can i do ?
-
no help ?
i try everything, tftp, CSRFtoken ... nothing work, beacause of this 1.1.1 firmware file .... :headbang:
how to boot on bank 1 or 2 of this damned modem ? (dga4130)
-
Hi, in order to root your device you must have firmware version 1.0.3. So install it via tftpd. (set up tftpd64 on your system, then boot the device holding the reset button at the same moment the first orange led lights up).
If you can't see the correct firmware version, then your device is booting from bank_2. To force it booting from the opposite bank, turn on the device, wait until the orange led comes up, then push quickly the power switch off and on every 4 seconds, until 3 very dim leds blink. Do this again twice (overall 3 times), this is the way to force the boot from bank_1.
Now you can root your device with autoflashgui.
-
thank u arny91, for your help. :P
first step, ok already flash bank 1 to 1.03.
The nightmare is for switching to this bank !!! :headbang:
i can see orange led up, but i don't understand what you (and i can read this in italian ;-) post of this forum ) mean exactly by " then push quickly the power switch off and on every 4 seconds" ?
and what are the "dim leds blinks" ... i just luckily see a blue led ... briefly ...
a video would be appreciate, i know, i am a lamer on this but ... sorry.
-
stucking on this firmware ... :facepalm:
Release AGTEF_1.1.1 ... this is a jail :help:
-
:pray:
the miracle, comes !!!
with my release dga4130, no flashing dim leds but , just 3 dim leds ... very dim !!!
now i m reading to flash all bank 1 and 2 with 1.0.3. >:D
thank u again !! :clap:
-
ok, now i'm in ... i d'ont want to be put outside again : >:(
What is the way to place AGTEF_1.0.3 on both bank ?
(i don't know how to change the TIM gui ... : if there is an how to )
-
@ledufakademy
hello, I think this is a feature of the gui ( update firmware and root even the opposite bank ) and of course try to installe the newest gui avaible.
Doing it " by hands" leaded me to an inconsistent state once so don't do it BY HAND
maybe @larsen64it could detail this better
Cheers
-
Thank you , all to your support. ;)
After recovering bank with 1.0.3, i relfash again with autoflashgui, then with ansuel (multicolor !) tool : AGTEF Unlocker.exe
GUI is Tehcnocolor, good, and firmware is ok.
Issue SOLVED,
Note : Sorry for posting, in the wrong section, but i can't reading italian , thank again for your forgiveness :clap:
-
@ledufakademy
You welcome to ask again what you need and even if you don't read/speak italian please continue to follow the forum ( maybe a translator ) since it is plenty of usefull infos
Bye