IlPuntoTecnico
Hardware e Software => Connessioni ADSL/VDSL/FTTC => Topic aperto da: barribar - 04 Aprile 2014, 11:54
-
hi all
I have alice gate voip 2 plus wifi that I want to setup (I have just BRIDGED no ROUTED)
I want to use with my ADSL service and wifi
(http://im76.gulfup.com/4hlBa9.png) (http://www.gulfup.com/?weCfcU)
anyone can help a newbies
thank you
-
hi all
I have alice gate voip 2 plus wifi that I want to setup (I have just BRIDGED no ROUTED)
I want to use with my ADSL service and wifi
(http://im76.gulfup.com/4hlBa9.png) (http://www.gulfup.com/?weCfcU)
anyone can help a newbies
thank you
Hi, what is your ISP. There are 2 different version of Alice Gate VoIP 2 Plus Wi-Fi.
AGIF= Dial Face Factory
AGPF= Pirelli Factory
so if you have an AGIF you will set this with the serial console
if you have an AGPF you set with the wto pin for the serial.
-
Hi, what is your ISP. There are 2 different version of Alice Gate VoIP 2 Plus Wi-Fi.
AGIF= Dial Face Factory
AGPF= Pirelli Factory
so if you have an AGIF you will set this with the serial console
if you have an AGPF you set with the wto pin for the serial.
thank you for your reply
I downloaded another file DISCUS and now I have Bridged + ROUTED
but I can not connect (see pic)
Can you help me please ?
(http://im49.gulfup.com/9Epdqd.png) (http://www.gulfup.com/?BvllF8)
-
thank you for your reply
I downloaded another file DISCUS and now I have Bridged + ROUTED
but I can not connect (see pic)
Can you help me please ?
(http://im49.gulfup.com/9Epdqd.png) (http://www.gulfup.com/?BvllF8)
What your ISP (Internet Provider)? The Telegestione is the TR069, Telecom uses this protocol for upgrade the devices. So, you will do not the flag on TR069. The telnet is enable on the router? For the telnet WIN+R and telnet 192.168.1.1 the user and password are admin. Before disable the TR069 you will check that telnet is enable on the router. How do you access to the advacend menu?
-
What your ISP (Internet Provider)? The Telegestione is the TR069, Telecom uses this protocol for upgrade the devices. So, you will do not the flag on TR069. The telnet is enable on the router? For the telnet WIN+R and telnet 192.168.1.1 the user and password are admin. Before disable the TR069 you will check that telnet is enable on the router. How do you access to the advacend menu?
the TR-069 is not enabled
(http://im44.gulfup.com/Z5Xpfs.png) (http://www.gulfup.com/?NmHyPU)
I can telnet 192.168.1.1 with user and pass (admin)
I can access to the advanced menu with
http://192.168.1.1/admin.html
my ISP is foreigner provider
The problem I can access the network with my pc see pic
(http://im81.gulfup.com/mHEok3.png) (http://www.gulfup.com/?UFh8Rp)
but I want that router can access the network without my pc and I can use my wifi
here is my Network Connections
(http://im81.gulfup.com/fw7DmX.png) (http://www.gulfup.com/?UqwNuX)
thank you
-
For enable telnet: download the discus from the router and open it with a text editor (Wordpad, Textedit...) and find this:
(telnets
(disabled(1))
(ports
You change it with:
(telnets
(disabled(0))
(ports
Upload the new file in the router and wait the reboot
Now the telnet is enabled on the router: WIN+R --> telnet 192.168.1.1
Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0
conf reconf 1
Your ISP is PPPOE or PPOA?
-
For enable telnet: download the discus from the router and open it with a text editor (Wordpad, Textedit...) and find this:
(telnets
(disabled(1))
(ports
You change it with:
(telnets
(disabled(0))
(ports
Upload the new file in the router and wait the reboot
Now the telnet is enabled on the router: WIN+R --> telnet 192.168.1.1
Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0
conf reconf 1
Your ISP is PPPOE or PPOA?
ok for set /cwmp/enabled 0
my ISP is PPPOE
-
ok for set /cwmp/enabled 0
my ISP is PPPOE
Ok. You configured the new connection of your ISP in the router?
-
Ok. You configured the new connection of your ISP in the router?
yes I think
with quick setup see pic
(http://im67.gulfup.com/bRDWN1.png) (http://www.gulfup.com/?cJLOLW)
-
now maintain active the connection: download the discus and find this
(ppp2
(enabled(0))
.
.
change it with:
(ppp2
(enabled(1))
.
.
-
now upload the new discus in the router.
-
now maintain active the connection: download the discus and find this
(ppp2
(enabled(0))
.
.
change it with:
(ppp2
(enabled(1))
.
.
Ok I changed 0 to 1 and I uplaoded into router
but when the router restart I see that PPP2 become 0
(ppp2
(enabled(0))
(logical_network(1))
-
Ok I changed 0 to 1 and I uplaoded into router
but when the router restart I see that PPP2 become 0
(ppp2
(enabled(0))
(logical_network(1))
Please post an image of the Connection Wizard
-
Please post an image of the Connection Wizard
look here
(http://im56.gulfup.com/F8znay.png) (http://www.gulfup.com/?oKMjPu)
(http://im56.gulfup.com/WKJntE.png) (http://www.gulfup.com/?4D6Zdj)
(http://im56.gulfup.com/9vrBpL.png) (http://www.gulfup.com/?T7FCz6)
(http://im56.gulfup.com/C5460C.png) (http://www.gulfup.com/?5CzK7X)
(http://im56.gulfup.com/7EGQJH.png) (http://www.gulfup.com/?Dzhjv5)
do I have to change this user and password in Bridged Properties>PPP>Login User Name and Login Password Like here :
(http://im61.gulfup.com/Sf77fJ.png) (http://www.gulfup.com/?yOPi5r)
-
Click Network Connections, all the connections, the maps and post the image please.
-
Click Network Connections, all the connections, the maps and post the image please.
here are the pic
(http://im43.gulfup.com/A2gNUQ.png) (http://www.gulfup.com/?7ZgNmx)
(http://im43.gulfup.com/Hll0xH.png) (http://www.gulfup.com/?gz3Da4)
-
Thank you. The new connection that you have created is Telecom Italia or Marocco Telecom? Why Telecom Italia is disabled?
-
Thank you. The new connection that you have created is Telecom Italia or Marocco Telecom? Why Telecom Italia is disabled?
I think I made many mistakes
and I upload a new Discus.con
can you please tel me step by step what can I do ?
here my new config
(http://im51.gulfup.com/BJaksA.png) (http://www.gulfup.com/?7NWAzL)
(http://im51.gulfup.com/ifdaQH.png) (http://www.gulfup.com/?X5ADH4)
where can I create my connecion?
In quick setup ?
-
Well:
1. The led Service on the router is off?
2. For configuring your connection you have to set the connection Alice Adsl with your parameter of connections.
-
Well:
1. The led Service on the router is off?
2. For configuring your connection you have to set the connection Alice Adsl with your parameter of connections.
1. The led Service on the router is ON
2. configuring my connection set to the connection Alice Adsl with my parameter of connections. >>>> OK
-
1. The led Service on the router is ON
2. configuring my connection set to the connection Alice Adsl with my parameter of connections. >>>> OK
So the internet does work?
-
So the internet does work?
No
I have
Telegestione Connessione in corso
why I have in Alice ADSL Properties : Default Gateway: 10.112.112.114 and DNS Server: 151.99.125.1
Name:
Device Name: ppp2
Status: Reconnecting...
Network: WAN
Underlying Device: WAN ETHoA
Connection Type: PPPoE
Download Rate: 4 MB
Upload Rate: 281 KB
IP Address: 10.64.64.66
Default Gateway: 10.112.112.114
DNS Server: 151.99.125.1
151.99.0.100
Service Name:
Username: baribar44
VPI.VCI: 8.35
Received Packets: 0
Sent Packets: 30
Time Span: 0:07:2
-
Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0 [you will press enter]
conf reconf 1 [you will press enter]
-
Let's disable TR069C, for do this go to Remote Administration, and do not the flag on TR-069
Now from telnet write this:
conf set /cwmp/enabled 0 [you will press enter]
conf reconf 1 [you will press enter]
ok
why I have in Alice ADSL Properties : Default Gateway: 10.112.112.114 and DNS Server: 151.99.125.1
Name:
Device Name: ppp2
Status: Reconnecting...
Network: WAN
Underlying Device: WAN ETHoA
Connection Type: PPPoE
Download Rate: 4 MB
Upload Rate: 281 KB
IP Address: 10.64.64.66
Default Gateway: 10.112.112.114
DNS Server: 151.99.125.1
151.99.0.100
Service Name:
Username: baribar44
VPI.VCI: 8.35
Received Packets: 0
Sent Packets: 30
Time Span: 0:07:2
-
ok
why I have in Alice ADSL Properties : Default Gateway: 10.112.112.114 and DNS Server: 151.99.125.1
Name:
Device Name: ppp2
Status: Reconnecting...
Network: WAN
Underlying Device: WAN ETHoA
Connection Type: PPPoE
Download Rate: 4 MB
Upload Rate: 281 KB
IP Address: 10.64.64.66
Default Gateway: 10.112.112.114
DNS Server: 151.99.125.1
151.99.0.100
Service Name:
Username: baribar44
VPI.VCI: 8.35
Received Packets: 0
Sent Packets: 30
Time Span: 0:07:2
You will set the DNS and default gateway of the provider.
-
You will set the DNS and default gateway of the provider.
NOOOOOO
It's in the new discus.conf
-
For dns server you can try the DNS of Google.
-
Are you in modalità bridged+router or bridged?
-
Are you in modalità bridged+router or bridged?
hi gabnik
I have
Modalità Bridged+Routed
my provider DNS : 62.251.229.237 and 62.251.229.223
-
hi gabnik
I have
Modalità Bridged+Routed
my provider DNS : 62.251.229.237 and 62.251.229.223
So put the DNS in the camp DNS of Alice ADSL
-
So put the DNS in the camp DNS of Alice ADSL
I put it but nothing
don't forget I can access network by my computer
can I change the user and pass for this ? or can I delete this TELECOM ITALIA ?
(http://im44.gulfup.com/iqJcVT.png) (http://www.gulfup.com/?h1co3w)
-
can you please look at this
(http://im62.gulfup.com/z9xaAM.png) (http://www.gulfup.com/?36NbVH)
-
I put it but nothing
don't forget I can access network by my computer
can I change the user and pass for this ? or can I delete this TELECOM ITALIA ?
(http://im44.gulfup.com/iqJcVT.png) (http://www.gulfup.com/?h1co3w)
Ehm, I don't know, but I think that Telecom Italia and the user and password are for the TR069 that you have no active...
-
Ehm, I don't know, but I think that Telecom Italia and the user and password are for the TR069 that you have no active...
can I delete it ?
-
can I delete it ?
I don't know... but in my opinion i have the connection