IlPuntoTecnico
Hardware e Software => Connessioni ADSL/VDSL/FTTC => Topic aperto da: Falko - 01 Ottobre 2009, 01:52
-
Domanda come da titolo, avendo di recente modificato la piastra dell'hag a226m Fw ed essere riuscito ad accedere tramite seriale all'apparato (la procedura che ho seguito è documentata qui https://www.ilpuntotecnico.com/forum/index.php/topic,9281 (https://www.ilpuntotecnico.com/forum/index.php/topic,9281)), sono molto tentato di fare un flash dell'intera architettura ma prima di fare questa operazione mi pare cosa buona e giusta fare un dump all'intero sistema presente in flash per poter, in caso di problemi od altro, poterlo riportare allo stato iniziale. A questo punto però non so come muovermi, che procedura/programmi dovrei utilizzare per eseguire l'operazione? (ho a disposizione sia sistemi Windows che Linux che FreeBSD per gli eventuali programmi richiesti).
Aggiunta: per il backup intendo creare da zero i files wi ed rmt per il successivo reflash
Grazie a tutti coloro sapranno illuminarmi in questa procedura :)
-
per l'estrazione con la jtag non c'è problema la macchina e riconosciuta da alice03
come di seguito:
per i file wi e rmt non so se è possibile crearli.
ciao
C:\jtag\pirelli>alice03 -probeonly /cable:wiggler
============================================
EJTAG Debrick Utility for Alice routers v0.3
============================================
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000110001101011000000101111111 (0635817F)
*** Found a Broadcom BCM6358 Rev 1 CPU chip ***
- EJTAG IMPCODE ....... : 00000000100000011000100100000100 (00818904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done
Probing Flash at (Flash Window: 0x1f000000) ... Done
Flash Vendor ID: 00000000000000000000000011000010 (000000C2)
Flash Device ID: 00000000000000000010001001111110 (0000227E)
*** Found a MX29LV640MT 4Mx16 TopB (8MB) Flash Chip ***
- Flash Chip Window Start .... : 1f800000
- Flash Chip Window Length ... : 00800000
- Selected Area Start ........ : 00000000
- Selected Area Length ....... : 00000000
*** REQUESTED OPERATION IS COMPLETE ***
-------------------------------------------------------------
-------------------------------------------------------------
questo il boot:
CFE version 1.0.37-8.7 for BCM96358 (32bit,SP,BE)
Build Date: lun apr 2 10:48:55 CEST 2007 (gpaolo@buildserver)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 8192KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80527ED0 (1208016)
Initialized Data: 0x8041D940 - 0x8041F700 (7616)
BSS Area: 0x8041F700 - 0x80425ED0 (26576)
Local Heap: 0x80425ED0 - 0x80525ED0 (1048576)
Stack Area: 0x80525ED0 - 0x80527ED0 (8192)
Text (code) segment: 0x80401000 - 0x8041D938 (117048)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Resetting Secondary CPU...
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-6) : DWV-S0
Number of MAC Addresses (1-32) : 13
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
---------------------------------------------------------------
---------------------------------------------------------------