se do quella stringa esce fuori questo
root@OpenWrt:~# mtd -e -f $(cat /proc/banktable/booted) write "/tmp/timsm-vbnt-f
_16.3.7446-bank_dump" $(cat /proc/banktable/booted)
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>[:<device>...]
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
refresh refresh mtd partition
erase erase all data on device
write <imagefile>|- write <imagefile> (use - for stdin) to device
jffs2write <file> append <file> to the jffs2 partition on the devi ce
fixtrx fix the checksum in a trx header on first boot
Following options are available:
-q quiet mode (once: no [w] on writing,
twice: no status messages)
-n write without first erasing the blocks
-r reboot after successful command
-f force write without trx checks
-e <device> erase <device> before executing the command
-d <name> directory for jffs2write, defaults to "tmp"
-j <name> integrate <file> into jffs2 data when writing an image
-p write beginning at partition offset
-o offset offset of the image header in the partition(for fixtrx)
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
root@OpenWrt:~#
