Come da oggetto, vendo un TP-Link td-W8970, con firmware LEDE caricato ed header seriale saldato con i fili riportati fuori per risolvere rapidamente eventuali errori in fase di rinnovo firmware. Originalmente è venduto come ADSL2 ma io lo uso con Fastweb VDSL2 e va a 80/20Mb che è una bellezza:
root@LEDE:~# /etc/init.d/dsl_control status
ATU-C Vendor ID: Broadcom 177.26
ATU-C System Vendor ID: Broadcom
Chipset: Lantiq-VRX200 Unknown
Firmware Version: 5.9.0.12.1.7
API Version: 4.17.18.6
XTSE Capabilities: 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x7
Annex: A, B, C
Line Mode: G.993.2 (VDSL2)
Profile: 17a
Line State: UP [0x801: showtime_tc_sync]
Forward Error Correction Seconds (FECS): Near: 0 / Far: 642
Errored seconds (ES): Near: 35 / Far: 0
Severely Errored Seconds (SES): Near: 0 / Far: 0
Loss of Signal Seconds (LOSS): Near: 0 / Far: 0
Unavailable Seconds (UAS): Near: 33 / Far: 33
Header Error Code Errors (HEC): Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P): Near: 0 / Far: 0
Pre-emtive CRC errors (CRCP_P): Near: 0 / Far: 0
Power Management Mode: L0 - Synchronized
Latency / Interleave Delay: Down: Fast (0.13 ms) / Up: Fast (0.0 ms)
Data Rate: Down: 68.265 Mb/s / Up: 22.124 Mb/s
Line Attenuation (LATN): Down: 14.8dB / Up: 29.2dB
Signal Attenuation (SATN): Down: 14.8dB / Up: 29.4dB
Noise Margin (SNR): Down: 5.7dB / Up: 7.1dB
Aggregate Transmit Power (ACTATP): Down: -7.1dB / Up: 13.6dB
Max. Attainable Data Rate (ATTNDR): Down: 79.982 Mb/s / Up: 26.639 Mb/s
25€ più spedizione
