Ho un modem alice gate 2 plus voip che si riavvia in continuazione dopo aver caricato l'immagine AGPF_4.4.2. Il mio scopo era quello di sbloccarlo per usarlo come extender range (c'è qualcosa che mi sfugge). di seguito i messaggi della porta seriale, arriva all'ultima istruzione , e riprende da capo. Grazie in anticipo
"[21474538.100] Freeing unused kernel memory: 2106420k freed"
"^[[?6c"
remaining to flash ....... 00014240
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-8.7 for AGPF 0004 BCM96358 (32bit,SP,BE)
Build Date: Fri Oct 26 15:01:06 CEST 2007 ( claudio2@buildserver )
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Flash info:
device_id : 2201
meminfo.nsect : 128
totalSize : 1000000
query.num_erase_blocks : 1
query.device_size : 1000000
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528BD0 (1211344)
Initialized Data: 0x8041E880 - 0x804203E0 (7008)
BSS Area: 0x804203E0 - 0x80426BD0 (26608)
Local Heap: 0x80426BD0 - 0x80526BD0 (1048576)
Stack Area: 0x80526BD0 - 0x80528BD0 (8192)
Text (code) segment: 0x80401000 - 0x8041E878 (120952)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : openrg.img
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2) : AGPF-S0
Number of MAC Addresses (1-32) : 13
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Sizeof Tag Used : 256
Two valid image tags found ...
Trying to boot from FIRST image copy (0x80010000) ...
latest imageSequence found: ... 18
- Flash Kernel Address: 0xBE020100
- Tag->kernelLen: 0x007236A0
- Flash Kernel Address: 0xBE020100
- Tag Kernel crc : 0xE383F1B8 - calculated: 0xE383F1B8
Decompression OK! - starting 0
Entry at 0x80010000
Distribution: AGPF
Version: AGPF_4.4.2
Build Date: 2009/02/18-18:04
Closing network.
Starting program at 0x80010000
SGP START PARTITION: 0
Uncompressing Linux....................................................
CFE version 1.0.37-8.7 for AGPF 0004 BCM96358 (32bit,SP,BE)
Build Date: Fri Oct 26 15:01:06 CEST 2007 ( claudio2@buildserver )
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Flash info:
device_id : 2201
meminfo.nsect : 128
totalSize : 1000000
query.num_erase_blocks : 1
query.device_size : 1000000
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE: 0x80401000 - 0x80528BD0 (1211344)
Initialized Data: 0x8041E880 - 0x804203E0 (7008)
BSS Area: 0x804203E0 - 0x80426BD0 (26608)
Local Heap: 0x80426BD0 - 0x80526BD0 (1048576)
Stack Area: 0x80526BD0 - 0x80528BD0 (8192)
Text (code) segment: 0x80401000 - 0x8041E878 (120952)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : openrg.img
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2) : AGPF-S0
Number of MAC Addresses (1-32) : 13
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Sizeof Tag Used : 256
Two valid image tags found ...
Trying to boot from FIRST image copy (0x80010000) ...
latest imageSequence found: ... 18
- Flash Kernel Address: 0xBE020100
- Tag->kernelLen: 0x007236A0
- Flash Kernel Address: 0xBE020100
- Tag Kernel crc : 0xE383F1B8 - calculated: 0xE383F1B8
Decompression OK! - starting 0
Entry at 0x80010000
Distribution: AGPF
Version: AGPF_4.4.2
Build Date: 2009/02/18-18:04
Closing network.
Starting program at 0x80010000
SGP START PARTITION: 0
Uncompressing Linux............................................................. ................................................................................ ................................................................................ ................................................................Ok
Booting the kernel
[21474536.480] Linux version 2.6.16.14 #2 Wed Feb 18 18:04:13 CET 2009
[21474536.480] AGPF-S0 prom init
[21474536.480] CPU revision is: 0002a010
[21474536.480] Determined physical RAM map:
[21474536.480] memory: 01f00000 @ 00000000 (usable)
[21474536.480] Built 1 zonelists
[21474536.480] Kernel command line:
[21474536.480] brcm mips: enabling icache and dcache...
[21474536.480] Primary instruction cache 32kB, physically tagged, 2-way, linesiz e 16 bytes.
[21474536.480] Primary data cache 16kB, 2-way, linesize 16 bytes.
[21474536.480] Synthesized TLB refill handler (21 instructions).
[21474536.480] Synthesized TLB load handler fastpath (33 instructions).
[21474536.480] Synthesized TLB store handler fastpath (33 instructions).
[21474536.480] Synthesized TLB modify handler fastpath (32 instructions).
[21474536.480] PID hash table entries: 128 (order: 7, 2048 bytes)
[21474536.480] Using 150.000 MHz high precision timer.
[21474536.485] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[21474536.490] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[21474536.500] Memory: 22228k/31744k available (2110k kernel code, 9516k reserve d, 341k data, 116k init, 0k highmem)
[21474536.610] Mount-cache hash table entries: 512
[21474536.615] Checking for 'wait' instruction... available.
[21474536.690] NET: Registered protocol family 16
[21474536.695] SCSI subsystem initialized
[21474536.700] usbcore: registered new driver usbfs
[21474536.705] usbcore: registered new driver hub
[21474536.735] fuse init (API version 7.6)
[21474536.740] io scheduler noop registered
[21474536.745] io scheduler anticipatory registered (default)
[21474536.750] io scheduler deadline registered
[21474536.755] io scheduler cfq registered
[21474536.900]
[21474536.900] Random: 0x55122f2b
[21474537.200] loop: loaded (max 8 devices)
[21474537.205] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
[21474537.215] ehci_hcd 0000:00:0a.0: EHCI Host Controller
[21474537.220] ehci_init: 1
[21474537.220] ehci_init: 2
[21474537.225] ehci_init: 3
[21474537.225] ehci_init: 4
[21474537.230] ehci-hcd: writing 96358 extended usb registers
[21474537.260] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus numbe r 1
[21474537.265] ehci_hcd 0000:00:0a.0: irq 18, io mem 0xfffe1300
[21474537.270] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, driver 10 Dec 2004
[21474537.275] usb usb1: configuration #1 chosen from 1 choice
[21474537.280] hub 1-0:1.0: USB hub found
[21474537.285] hub 1-0:1.0: 2 ports detected
[21474537.395] hub 1-0:1.0: over-current change on port 1
[21474537.400] PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
[21474537.405] ohci_hcd 0000:00:09.0: OHCI Host Controller
[21474537.410] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus numbe r 2
[21474537.415] ohci_hcd 0000:00:09.0: irq 13, io mem 0xfffe1400
[21474537.475] usb usb2: configuration #1 chosen from 1 choice
[21474537.480] hub 2-0:1.0: USB hub found
[21474537.480] hub 2-0:1.0: 2 ports detected
[21474537.505] hub 1-0:1.0: over-current change on port 2
[21474537.615] usbcore: registered new driver usblp
[21474537.615] /home/sj1mingofu/telecom/AGPF_4_4_2/openrg/rg/os/linux-2.6/driver s/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[21474537.620] Initializing USB Mass Storage driver...
[21474537.625] usbcore: registered new driver usb-storage
[21474537.630] USB Mass Storage support registered.
[21474537.635] usbcore: registered new driver usbserial
[21474537.640] /home/sj1mingofu/telecom/AGPF_4_4_2/openrg/rg/os/linux-2.6/driver s/usb/serial/usb-serial.c: USB Serial support registered for generic
[21474537.645] usbcore: registered new driver usbserial_generic
[21474537.650] /home/sj1mingofu/telecom/AGPF_4_4_2/openrg/rg/os/linux-2.6/driver s/usb/serial/usb-serial.c: USB Serial Driver core
[21474537.655] /home/sj1mingofu/telecom/AGPF_4_4_2/openrg/rg/os/linux-2.6/driver s/usb/serial/usb-serial.c: USB Serial support registered for airprime
[21474537.660] usbcore: registered new driver airprime
[21474537.665] md: raid0 personality registered for level 0
[21474537.670] md: raid1 personality registered for level 1
[21474537.675] md: raid5 personality registered for level 5
[21474537.680] md: raid4 personality registered for level 4
[21474537.685] raid5: measuring checksumming speed
[21474537.715] 8regs : 237.600 MB/sec
[21474537.740] 8regs_prefetch: 201.600 MB/sec
[21474537.765] 32regs : 256.800 MB/sec
[21474537.790] 32regs_prefetch: 243.200 MB/sec
[21474537.790] raid5: using function: 32regs (256.800 MB/sec)
[21474537.795] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[21474537.800] md: bitmap version 4.39
[21474537.805] u32 classifier
[21474537.805] OLD policer on
[21474537.810] NET: Registered protocol family 2
[21474537.865] IP route cache hash table entries: 256 (order: -2, 1024 bytes)
[21474537.870] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[21474537.875] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[21474537.880] TCP: Hash tables configured (established 1024 bind 1024)
[21474537.885] TCP reno registered
[21474537.890] IPv4 over IPv4 tunneling driver
[21474537.895] GRE over IPv4 tunneling driver
[21474537.900] NET: Registered protocol family 1
[21474537.905] NET: Registered protocol family 17
[21474537.910] NET: Registered protocol family 8
[21474537.915] NET: Registered protocol family 20
[21474537.915] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[21474537.920] All bugs added by David S. Miller <[email protected]>
[21474537.925] brcmboard: brcm_board_init entry
D%G[21474537.930] -- cfi_chip_setup base : 0
[21474537.935] -- cfi_chip_setup base : 0
[21474537.940] -- cfi_chip_setup base : 0
[21474537.945] -- cfi_chip_setup base : 0
[21474537.945] -- cfi_chip_setup base : 0
[21474537.950] Number of erase regions: 1
[21474537.955] Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
[21474537.960] Primary Algorithm Table at 0040
[21474537.965] Alternative Vendor Command Set: 0000 (None)
[21474537.970] No Alternate Algorithm Table
[21474537.975] Vcc Minimum: 2.7 V
[21474537.980] Vcc Maximum: 3.6 V
[21474537.985] No Vpp line
[21474537.985] Typical byte/word write timeout: 128 �s
[21474537.990] Maximum byte/word write timeout: 1024 �s
[21474537.995] Typical full buffer write timeout: 128 �s
[21474538.000] Maximum full buffer write timeout: 4096 �s
[21474538.005] Typical block erase timeout: 1024 ms
[21474538.010] Maximum block erase timeout: 16384 ms
[21474538.015] Chip erase not supported
[21474538.020] Device size: 0x1000000 bytes (16 MiB)
[21474538.025] Flash Device Interface description: 0x0002
[21474538.030] - supports x8 and x16 via BYTE# with asynchronous interface
[21474538.035] Max. bytes in buffer write: 0x20
[21474538.040] Number of Erase Block Regions: 1
[21474538.045] Erase Region #0: BlockSize 0x20000 bytes, 128 blocks
[21474538.050] bcm963xx_flash: Found 1 x16 devices at 0x0 in 16-bit bank
[21474538.055] check_cmd_set:entry type 2 prim:1
[21474538.060] alling : cfi_cmdset_0002 = 2 p:1
[21474538.065] Amd/Fujitsu Extended Query Table at 0x0040
[21474538.070] bcm963xx_flash: CFI does not contain boot bank location. Assuming top.
[21474538.075] number of CFI chips: 1
[21474538.080] cfi_cmdset_0002: Disabling erase-suspend-program due to code brok enness.
[21474538.085] Creating 1 MTD partitions on "bcm963xx_flash":
[21474538.090] 0x00000000-0x01000000 : "openrg"
[21474538.095] bcm963xx_flash: detected at 0x1e000000 size 16777216 bytes
[21474538.100] bcm963xx_serial driver v2.0
[21474538.105] Freeing unused kernel memory: 2106420k freed
^[[?6c
CFE version 1.0.37-8.7 for AGPF 0004 BCM96358 (32bit,SP,BE)
Build Date: Fri Oct 26 15:01:06 CEST 2007 ( claudio2@buildserver )
Copyright (C) 2000-2005 Broadcom Corporation.Per precisare, l'ultima riga, cioè la
^[[?6c
non è un errore ma è proprio quello che scrive il modem.
