buongiorno a tutti, come promesso eccomi con un problema, non ne riesco a venir fuori, e più che a voi non sò proprio con chi parlare.
Tempo fà, nel 2008, ho flashato un hag ex fastxxx modello CPAZNTE61FWB con il firmware CPVA642_SIP_fk_sip_3.7.130V. Ricordo che funzionava tutto, navigavo via lan e via wifi con uplink ethernet su hag in fibra . (Lo ho usato pochissimo a dir la verità per poter avere un ricordo dei parametri e schermate telnet, poi ho dovuto traslocare)
Oggi, altra città e altro hub uplink ethernet adsl, non lavora più la scheda wifi. Non è mai caduto,preso acqua,preso pugni....solo qualche botta di mavaaqualpaese....
Ecco cosa vedo.
> hwversion show
CPVA642-0
> cfeversion show
1.0.37-102.68
> swversion show
3.7.130V-sip..d20e-C000000
# dmesg
Linux version 2.6.8.1 (monser@monser) (gcc version 3.4.2) #2 Tue Mar 8 16:55:20 CET 2011
Parallel flash device: name MX29LV640BT, id 0x22c9, size 8192KB
Total Flash size: 8192K with 135 sectors
kerSysFlashInit(): nvramData.szBoardId CPVA642
CPVA642 prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Allocating memory for DSP module core and initialization code
Allocated DSP module memory - CORE=0x8104ca80 SIZE=525984, INIT=0x0 SIZE=0
Memory: 28760k/32384k available (1930k kernel code, 3580k reserved, 509k data, 80k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 801f1084
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: device 0000:00:01.0 has unknown header type 61, ignoring.
NTFS driver 2.1.15 [Flags: R/O].
Initializing Cryptographic API
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PPP generic driver version 2.4.2
NET: Registered protocol family 24
IMQ starting with 6 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
Using noop io scheduler
bcm963xx_mtd driver v1.0
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbnet
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.11
brcmboard: brcm_board_init entry
Confirm button interrupt has been configured
bcm963xx_serial driver v2.0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6358A1 Ethernet Network Device v0.3 Mar 8 2011 16:52:50
Config Ethernet Switch Through SPI Slave Select 1
Switch reset...
BCM5325M_init: Found BCM5325E
dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
set_vnet_dev 0 name eth0
eth0: MAC Address: XX:XX:XX:XX:XX:78
netif_port_init: switch.lan1, MAC Address: XX:XX:XX:XX:XX:78
netif_port_init: switch.lan2, MAC Address: XX:XX:XX:XX:XX:78
netif_port_init: switch.lan3, MAC Address: XX:XX:XX:XX:XX:78
netif_port_init: switch.lan4, MAC Address: XX:XX:XX:XX:XX:78
netif_port_init: switch.lan5, MAC Address: XX:XX:XX:XX:XX:78
Telsey BCM6358A1 USB Network Device v0.4 Mar 8 2011 16:52:52
usb0: MAC Address: XX XX XX XX XX 79
usb0: Host MAC Address: XX XX XX XX XX 7A
DSP Driver: DSP init stub
Endpoint: endpoint_init entry
BOS: Enter bosInit
Enter bosAppInit
Exit bosAppInit
BOS: Exit bosInit
Endpoint: endpoint_init COMPLETED
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ehci_hcd 0000:00:0a.0: PCI device 14e4:6300 (Broadcom Corporation)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ehci_hcd 0000:00:0a.0: irq 18, pci mem c0015300
ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:0a.0
ehci_hcd 0000:00:0a.0: USB f.f enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ohci_hcd 0000:00:09.0: PCI device 14e4:6300 (Broadcom Corporation)
PCI: Setting latency timer of device 0000:00:09.0 to 64
ohci_hcd 0000:00:09.0: irq 13, pci mem c0017400
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (253 buckets, 0 max) - 368 bytes per conntrack
ip_conntrack_pptp version 2.1 loaded
ip_nat_pptp version 2.0 loaded
ip_conntrack_h323: init
ip_nat_h323: initialize the module!
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
eth0.101: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.101 entered promiscuous mode
br0: port 1(eth0.101) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0.101) entering forwarding state
device usb0 entered promiscuous mode
eth0.100: dev_set_promiscuity(master, 1)
device eth0.100 entered promiscuous mode
br1: port 1(eth0.100) entering learning state
br1: topology change detected, propagating
br1: port 1(eth0.100) entering forwarding state
eth0 Link UP.
# ifconfig
br0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:300 (300.0 B)
br1 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
inet addr:192.168.1.128 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:959 errors:0 dropped:0 overruns:0 frame:0
TX packets:730 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:147508 (144.0 KiB) TX bytes:410401 (400.7 KiB)
eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1197 errors:0 dropped:0 overruns:0 frame:0
TX packets:734 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:186991 (182.6 KiB) TX bytes:417221 (407.4 KiB)
Interrupt:25 Base address:0x4800
eth0.100 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:959 errors:0 dropped:0 overruns:0 frame:0
TX packets:730 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:154497 (150.8 KiB) TX bytes:413321 (403.6 KiB)
eth0.101 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:192 (192.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
switch.lan4 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:78
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:1197 errors:0 dropped:0 overruns:0 frame:0
TX packets:730 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
# logread
Jan 1 00:08:48 (none) user.debug syslog: iptables -I INPUT 1 -p udp --dport 68 -j ACCEPT 95
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: ipInfo.enblDhcpClnt =1, interface=waneth_1 116
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: status=1 82
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_initEthDhcpClient 72
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_initEthDhcpClient: Uplink Eth, protocol 6 96
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_initEthDhcpClient: interface=br1 87
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_initEthDhcpClient: dhcpc -i br1 & 88
Jan 1 00:08:49 (none) user.debug syslog: dhcpc -i br1 & 62
Jan 1 00:08:49 (none) user.info udhcpc: udhcp client (v0.9.6) started on interface br1 93
Jan 1 00:08:49 (none) user.info udhcpc: adapter index 23 63
Jan 1 00:08:49 (none) user.info udhcpc: adapter hardware address 00:03:6f:d9:7b:78 89
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: ipInfo.enblDhcpClnt =1, interface=waneth_1 116
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: status=4 82
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_getDaemonStatus: 72
Jan 1 00:08:49 (none) user.info udhcpc: Select for 4294966766 seconds 77
Jan 1 00:08:49 (none) user.info udhcpc: Updated timeout to 8, newState=INIT_SELECTING 93
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: ipInfo.enblDhcpClnt =1, interface=waneth_1 116
Jan 1 00:08:49 (none) user.info udhcpc: adding option 0x35 65
Jan 1 00:08:49 (none) user.info udhcpc: adding option 0x39 65
Jan 1 00:08:49 (none) user.info udhcpc: adding option 0x3c 65
Jan 1 00:08:49 (none) user.info udhcpc: adding option 0x37 65
Jan 1 00:08:49 (none) user.info udhcpc: Sending discover... 66
Jan 1 00:08:49 (none) user.info syslog: BcmWan_monitorWhileEthUp: status=4 82
Jan 1 00:08:49 (none) user.warn syslog: BcmWan_getDaemonStatus: 72
Jan 1 00:08:49 (none) user.info udhcpc: Select for 8 seconds 68
Jan 1 00:08:50 (none) user.info udhcpc: oooooh!!! got some! 66
Jan 1 00:08:50 (none) user.info udhcpc: Received DHCPOFFER 65
Jan 1 00:08:50 (none) user.info udhcpc: Changed state to REQUESTING, was INIT_SELECTING 94
Jan 1 00:08:50 (none) user.info udhcpc: Select for 0 seconds 68
Jan 1 00:08:50 (none) user.info udhcpc: Updated timeout to 8, newState=REQUESTING 89
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x35 65
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x39 65
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x3c 65
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x32 65
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x36 65
Jan 1 00:08:50 (none) user.info udhcpc: adding option 0x37 65
Jan 1 00:08:50 (none) user.info udhcpc: Sending select for 192.168.1.128... 82
Jan 1 00:08:50 (none) user.info udhcpc: Select for 8 seconds 68
Jan 1 00:08:52 (none) user.info udhcpc: oooooh!!! got some! 66
Jan 1 00:08:52 (none) user.info udhcpc: Received DHCPACK 63
Jan 1 00:08:52 (none) user.info udhcpc: execle'ing /etc/dhcp/dhcp_getdata 80
Jan 1 00:08:53 (none) user.info udhcpc: DHCP lease obtained: 67
Jan 1 00:08:53 (none) user.info udhcpc: IP address: 192.168.1.128 76
Jan 1 00:08:53 (none) user.info udhcpc: Option 1 ( subnet): 255.255.255.0 87
Jan 1 00:08:53 (none) user.info udhcpc: Option 3 ( router) 72
Jan 1 00:08:53 (none) user.info udhcpc: Option 6 ( dns) 72
Jan 1 00:08:53 (none) user.info udhcpc: Option 15 ( domain): fastwebnet.it 87
Jan 1 00:08:53 (none) user.info udhcpc: Option 51 ( lease): 1800 78
Jan 1 00:08:53 (none) user.info udhcpc: Option 53 ( dhcptype): 5 75
Jan 1 00:08:53 (none) user.info udhcpc: Option 54 ( serverid): 192.168.1.254 87
Jan 1 00:08:53 (none) user.info udhcpc: Changed state to BOUND, was REQUESTING 85
Jan 1 00:08:53 (none) user.info udhcpc: entering unix listen mode 72
Jan 1 00:08:53 (none) user.info udhcpc: unix socket /var/dhcp_sock created 82
Jan 1 00:08:53 (none) user.info udhcpc: Select for 900 seconds 70
Jan 1 00:08:53 (none) user.info syslog: BcmWan_monitorWhileEthUp: ipInfo.enblDhcpClnt =1, interface=waneth_1 116
Jan 1 00:08:53 (none) user.info syslog: BcmWan_monitorWhileEthUp: status=4 82
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_getDaemonStatus: 72
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_initEthNat: 66
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_isEthWanMgr: interface= 78
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_isEthWanMgr: wanInfo.protocol=6, wanInfo.flag.pbr=1, wanId.cIntEth= wanInfo.connId=1 139
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface.connId=1, wanId.conId=1 107
Jan 1 00:08:53 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface wanId.conId=1 --> wan=eth1 110
Jan 1 00:08:53 (none) user.debug syslog: route add default gw 192.168.1.254 2>/dev/null 94
Jan 1 00:08:53 (none) user.debug syslog: echo > /proc/net/ip_conntrack 77
Jan 1 00:08:53 (none) user.debug syslog: echo "1000" > /proc/sys/net/ipv4/ip_conntrack_max 97
Jan 1 00:08:54 (none) user.debug syslog: iptables -t nat -D PREROUTING -i br0 -d 192.168.0.1 -p udp --dport 53 -j DNAT --to 128.9.0.107 2>/dev/null 154
Jan 1 00:08:54 (none) user.warn syslog: ETH: BcmWan_getWanConIdByName: name waneth_1 92
Jan 1 00:08:54 (none) user.debug syslog: iptables -t nat -A POSTROUTING -o br1 -s 192.168.0.0/255.255.255.0 -j SNAT --to 192.168.1.128 141
Jan 1 00:08:54 (none) user.debug syslog: iptables -t nat -D PREROUTING -i br0 -d 192.168.0.1 -p udp --dport 53 -j DNAT --to 62.101.93.101 2>/dev/null 156
Jan 1 00:08:54 (none) user.debug syslog: iptables -t nat -A PREROUTING -i br0 -d 192.168.0.1 -p udp --dport 53 -j DNAT --to 62.101.93.101 144
Jan 1 00:08:54 (none) user.debug syslog: /bin/dnsprobe & 63
Jan 1 00:08:54 (none) user.debug syslog: iptables -t nat -I PREROUTING 1 -i waneth_1 -s 192.168.1.129 -j ACCEPT 118
Jan 1 00:08:54 (none) user.info syslog: BcmNtwk_setEthWanAccess: pWanInfo->flag.manag:=1, remote=waneth_1 113
Jan 1 00:08:54 (none) user.notice dnsprobe[806]: dnsprobe started! 74
Jan 1 00:08:55 (none) user.debug syslog: setkey -f /var/setkey.conf 74
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_initNewRoutingTable: 75
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_initNewRoutingTable LAN_NET = 192.168.0.0 96
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_initNewRoutingTable LAN_MASK = 24 88
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanMgr: interface= 78
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanMgr: wanInfo.protocol=6, wanInfo.flag.pbr=1, wanId.cIntEth= wanInfo.connId=1 139
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface.connId=1, wanId.conId=1 107
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface wanId.conId=1 --> wan=eth1 110
Jan 1 00:08:56 (none) user.debug syslog: route del default 65
Jan 1 00:08:56 (none) user.debug syslog: route add default gw 192.168.1.254 dev br1 90
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanData: infowanId->conId=1 87
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanData: wanInfo.protocol=6, wanInfo.flag.pbr=1 107
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanData: found interface->connId=1 wanId.conId=1 108
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_isEthWanData: found interface wanId.cIntEZ 116
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_wanDataPBR intereface (br1) gateway: 192.168.1.254 105
Jan 1 00:08:56 (none) user.debug syslog: iproute add default dev br1 via 192.168.1.254 table 101 103
Jan 1 00:08:56 (none) user.warn syslog: BcmWan_wanDataPBR 'iproute add default dev br1 via 192.168.1.254 table 101' return=0 132
Jan 1 00:08:56 (none) user.debug syslog: ifconfig br1 > /var/tlsipinfo 77
Jan 1 00:08:56 (none) user.debug syslog: iproute add 192.168.1.0/24 dev br1 table 101 93
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.1.128 table 101 87
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.1.128 table 101' return=0 116
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.0.0/24 table 101 89
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.0.0/24 table 101 ' return=0 118
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.0.1/32 table main 90
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.0.1/32 table main ' return=0 119
Jan 1 00:08:57 (none) user.debug syslog: iproute flush cache 67
Jan 1 00:08:57 (none) user.info syslog: BcmWan_monitorWhileEthUp: ipInfo.enblDhcpClnt =1, interface=waneth_1 116
Jan 1 00:08:57 (none) user.info syslog: BcmWan_monitorWhileEthUp: status=6 82
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_getDaemonStatus: 72
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_initNewRoutingTable: 75
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_initNewRoutingTable LAN_NET = 192.168.0.0 96
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_initNewRoutingTable LAN_MASK = 24 88
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: interface= 78
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: wanInfo.protocol=6, wanInfo.flag.pbr=1, wanId.cIntEth= wanInfo.connId=1 139
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface.connId=1, wanId.conId=1 107
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface wanId.conId=1 --> wan=eth1 110
Jan 1 00:08:57 (none) user.debug syslog: route del default 65
Jan 1 00:08:57 (none) user.debug syslog: route add default gw 192.168.1.254 dev br1 90
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanData: infowanId->conId=1 87
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanData: wanInfo.protocol=6, wanInfo.flag.pbr=1 107
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanData: found interface->connId=1 wanId.conId=1 108
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanData: found interface wanId.cIntEZ 116
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR intereface (br1) gateway: 192.168.1.254 105
Jan 1 00:08:57 (none) user.debug syslog: iproute add default dev br1 via 192.168.1.254 table 101 103
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iproute add default dev br1 via 192.168.1.254 table 101' return=512 134
Jan 1 00:08:57 (none) user.debug syslog: ifconfig br1 > /var/tlsipinfo 77
Jan 1 00:08:57 (none) user.debug syslog: iproute add 192.168.1.0/24 dev br1 table 101 93
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.1.128 table 101 87
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.1.128 table 101' return=0 116
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.0.0/24 table 101 89
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.0.0/24 table 101 ' return=0 118
Jan 1 00:08:57 (none) user.debug syslog: iprule add from 192.168.0.1/32 table main 90
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_wanDataPBR 'iprule add from 192.168.0.1/32 table main ' return=0 119
Jan 1 00:08:57 (none) user.debug syslog: iproute flush cache 67
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_initEthNat: 66
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: interface= 78
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: wanInfo.protocol=6, wanInfo.flag.pbr=1, wanId.cIntEth= wanInfo.connId=1 139
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface.connId=1, wanId.conId=1 107
Jan 1 00:08:57 (none) user.warn syslog: BcmWan_isEthWanMgr: found interface wanId.conId=1 --> wan=eth1 110
Jan 1 00:08:57 (none) user.warn syslog: ETH: BcmWan_getWanConIdByName: name waneth_1 92
Jan 1 00:08:57 (none) user.debug syslog: iptables -t nat -A POSTROUTING -o br1 -s 192.168.0.0/255.255.255.0 -j SNAT --to 192.168.1.128 141
Jan 1 00:08:57 (none) user.debug syslog: iptables -t nat -I PREROUTING 1 -i waneth_1 -s 192.168.1.129 -j ACCEPT 118
Jan 1 00:08:57 (none) user.info syslog: BcmNtwk_setEthWanAccess: pWanInfo->flag.manag:=1, remote=waneth_1 113
Jan 1 00:08:58 (none) user.debug syslog: setkey -f /var/setkey.conf 74
Jan 1 00:09:14 (none) user.debug syslog: echo '/dev/ttyp0 0' >> /var/voice/log 85
Jan 1 00:11:28 (none) user.warn syslog: BcmWeb_getEthLanInfo: LanInfo.vlanId=0, LanInfo.skb_priority=0, LanInfo.ivlan_qos=0 131
Jan 1 00:11:33 (none) user.warn syslog: BcmWeb_getEthLanInfo: LanInfo.vlanId=0, LanInfo.skb_priority=0, LanInfo.ivlan_qos=0 131
Jan 1 00:11:36 (none) user.debug syslog: ifconfig wl0 > /var/hwaddr 75
Jan 1 00:11:41 (none) user.debug syslog: ifconfig wl0 > /var/hwaddr 75
Jan 1 00:12:02 (none) user.debug syslog: ifconfig wl0 > /var/hwaddr 75
Jan 1 00:14:30 (none) user.debug syslog: ifconfig wl0 > /var/hwaddr 75
Jan 1 00:14:38 (none) user.warn syslog: setupAll 1337 - m_wlVar.wlMode:ap 81
Jan 1 00:14:38 (none) user.warn syslog: stopNas 56
Jan 1 00:14:38 (none) user.debug syslog: ifconfig wl0 down 2> /dev/null 78
Jan 1 00:14:38 (none) user.debug syslog: brctl delif br0 wl0 2> /dev/null 80
Jan 1 00:14:38 (none) user.debug syslog: ifconfig wl1 down 2> /dev/null 78
Jan 1 00:14:38 (none) user.debug syslog: brctl delif br0 wl1 2> /dev/null 80
Jan 1 00:14:38 (none) user.debug syslog: ifconfig wl2 down 2> /dev/null 78
Jan 1 00:14:38 (none) user.debug syslog: brctl delif br0 wl2 2> /dev/null 80
Jan 1 00:14:38 (none) user.debug syslog: ifconfig wl3 down 2> /dev/null 78
Jan 1 00:14:38 (none) user.debug syslog: brctl delif br0 wl3 2> /dev/null 80
Jan 1 00:14:38 (none) user.warn syslog: setupAll: setupAll WiFI line=1361 81
Jan 1 00:14:38 (none) user.debug syslog: ifconfig wl0 down 65
Jan 1 00:14:38 (none) user.debug syslog: ifconfig ra0 down 65
Jan 1 00:14:38 (none) user.debug syslog: rmmod rt61ap 60
Jan 1 00:14:38 (none) user.debug syslog: rmmod rt61 58
Jan 1 00:14:38 (none) user.warn syslog: setupAll: -----line=1395 72
Jan 1 00:14:38 (none) user.warn syslog: setupAll TO BE IMPLEMENTED-----line=1456 88
Jan 1 00:14:38 (none) user.debug syslog: insmod /lib/modules/2.6.8.1/extra/rt61ap.ko 91
Jan 1 00:14:40 (none) user.debug syslog: ifconfig wl0 up 63
Jan 1 00:14:40 (none) user.debug syslog: ifconfig wl1 up 63
Jan 1 00:14:40 (none) user.debug syslog: ifconfig wl2 up 63
Jan 1 00:14:40 (none) user.debug syslog: ifconfig wl3 up 63
Jan 1 00:14:40 (none) user.debug syslog: brctl addif br0 wl0 67
Jan 1 00:14:40 (none) user.warn syslog: startNas 57
Jan 1 00:14:40 (none) user.info syslog: startNas: i=0 , m_wlMssidVar[i].wlSsid=Telsey-1, m_wlMssidVar[i].wlAuthMode=open 128
Jan 1 00:14:40 (none) user.info syslog: startNas: i=1 , m_wlMssidVar[i].wlSsid=Telsey-2, m_wlMssidVar[i].wlAuthMode=open 128
Jan 1 00:14:40 (none) user.info syslog: startNas: i=2 , m_wlMssidVar[i].wlSsid=Telsey-3, m_wlMssidVar[i].wlAuthMode=open 128
Jan 1 00:14:40 (none) user.info syslog: startNas: i=3 , m_wlMssidVar[i].wlSsid=Telsey-4, m_wlMssidVar[i].wlAuthMode=open 128
Jan 1 00:14:41 (none) user.info syslog: startRadius: i=0 m_wlMssidVar[i].m_ifcName=wl0, m_wlMssidVar[i].wlSsid=Telsey-1, m_wlMssidVar[i].wlAuthMode=open 160
Jan 1 00:14:41 (none) user.info syslog: startRadius: i=1 m_wlMssidVar[i].m_ifcName=wl1, m_wlMssidVar[i].wlSsid=Telsey-2, m_wlMssidVar[i].wlAuthMode=open 160
Jan 1 00:14:41 (none) user.info syslog: startRadius: i=2 m_wlMssidVar[i].m_ifcName=wl2, m_wlMssidVar[i].wlSsid=Telsey-3, m_wlMssidVar[i].wlAuthMode=open 160
Jan 1 00:14:41 (none) user.info syslog: startRadius: i=3 m_wlMssidVar[i].m_ifcName=wl3, m_wlMssidVar[i].wlSsid=Telsey-4, m_wlMssidVar[i].wlAuthMode=open 160
Jan 1 00:14:41 (none) user.debug syslog: iwpriv wl0 set TxQueueSize=50 77
Jan 1 00:14:41 (none) user.debug syslog: sendarp -s br0 -d br0 69
Jan 1 00:14:44 (none) user.debug syslog: ifconfig wl0 > /var/hwaddr 75
# iwconfig
lo no wireless extensions.
imq0 no wireless extensions.
imq1 no wireless extensions.
imq2 no wireless extensions.
imq3 no wireless extensions.
imq4 no wireless extensions.
imq5 no wireless extensions.
atm0 no wireless extensions.
cpcs0 no wireless extensions.
dsl0 no wireless extensions.
eth0 no wireless extensions.
switch.lan1 no wireless extensions.
switch.lan2 no wireless extensions.
switch.lan3 no wireless extensions.
switch.lan4 no wireless extensions.
switch.lan5 no wireless extensions.
Warning: Driver for device usb0 has been compiled with an ancient version
of Wireless Extension, while this program support version 11 and later.
Some things may be broken...
usb0 ESSID:off/any Nickname:""
NWID:off/any Frequency:inf GHz Access Point: 75:D8:00:00:00:00
Bit Rate:2.14745 Gb/s Sensitivity:2147448280/0
RTS thr:off Fragment thr:off
Encryption key:0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000-0000
Power Management:off
br0 no wireless extensions.
eth0.101 no wireless extensions.
eth0.100 no wireless extensions.
br1 no wireless extensions.
# lsmod
Module Size Used by
rt61ap 468224 0 - Live 0xc011d000 <---------------------rt61 332912 0 - Live 0xc032c000 settato in client station
ipt_LOG 4192 0 - Live 0xc011a000
ipt_ULOG 4528 0 - Live 0xc00af000
ipt_REDIRECT 768 0 - Live 0xc0114000
ipt_state 544 0 - Live 0xc0112000
ipt_FTOS 992 0 - Live 0xc0110000
ip_nat_irc 2304 0 - Live 0xc010e000
ipt_mark 416 0 - Live 0xc010c000
ipt_MARK 704 0 - Live 0xc010a000
ipt_IMQ 768 0 - Live 0xc0108000
ipt_TCPMSS 2272 0 - Live 0xc0106000
ipt_tos 416 0 - Live 0xc0104000
ipt_iprange 640 0 - Live 0xc0102000
ipt_connlimit 1696 0 - Live 0xc0100000
ipt_physdev 1104 0 - Live 0xc00fe000
ipt_MASQUERADE 1568 0 - Live 0xc00fc000
# ifconfig wl0 up
SIOCGIFFLAGS: No such device
# ifconfig ra0 up
SIOCGIFFLAGS: No such device
#
# pwd
/etc/Wireless
# ls -R
.:
RT61AP RT61STA
./RT61AP:
RT2561.bin RT2661.bin RT61AP-template.dat
RT2561S.bin RT61AP-template-o.dat RT61AP.dat
./RT61STA:
rt2561.bin rt2661.bin rt61sta.dat
rt2561s.bin rt61sta-template.dat
# pwd
/var/sys/class/net
# ls
atm0 dsl0 imq0 imq4 switch.lan2 usb0
br0 eth0 imq1 imq5 switch.lan3
br1 eth0.100 imq2 lo switch.lan4
cpcs0 eth0.101 imq3 switch.lan1 switch.lan5
# pwd
/var/run
# ls
RT61AP.dat httpd_pid rt61sta.dat telnetd_ifc
ethup ip syslogd.pid
# pwd
/lib/modules/2.6.8.1/extra
# ls
adsldd.ko bcm_usb.ko dspdd.ko rt61ap.ko
atmapi.ko bcmprocfs.ko endpointdd.ko rt61ap_ate.ko
bcm_enet.ko blaa_dd.ko rt61.ko vnet.ko
Questo lo cambia variando i valori dal web browser
# cat RT61AP.dat
#The word of "Default" must not be removed
Default
BssidNum=4
SSID=Telsey-1;-;-;-;
CountryCode=DB
HideSSID=0;1;1;1;
WirelessMode=0
TxRate=0
AutoChannelSelect=1
BasicRate=15
BeaconPeriod=100
DtimPeriod=1
TxPower=100
DisableOLBC=0
BGProtection=0
TxAntenna=
RxAntenna=
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=1
TurboRate=0
IgmpSnEnable=0;0;0;0;
WmmCapable=1;0;0;0;
AccessPolicy0=0
AccessControlList0=
AccessPolicy1=0
AccessControlList1=
AccessPolicy2=0
AccessControlList2=
AccessPolicy3=0
AccessControlList3=
PreAuth=0;0;0;0;
AuthMode=OPEN;WPAPSK;WPAPSK;WPAPSK;
EncrypType=NONE;TKIP;TKIP;TKIP;
WPAPSK=0629940ab11636e4cbc6;0629940ab11636e4cbc6;0629940ab11636e4cbc6;0629940ab11636e4cbc6;
DefaultKeyID=2;2;2;2;
Key1Type=0;0;0;0;
Key1Str=9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;
Key2Type=0;0;0;0;
Key2Str=9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;
Key3Type=0;0;0;0;
Key3Str=9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;
Key4Type=0;0;0;0;
Key4Str=9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;9e77ef512ef6ba8dcdf239b282;
RekeyMethod=TIME
RekeyInterval=2147483647
PMKCachePeriod=10
own_ip_addr=192.168.0.1
APAifsn=3;7;1;1
APCwmin=4;4;3;2
APCwmax=6;10;4;3
APTxop=0;0;94;47
APACM=0;0;0;0
BSSAifsn=3;7;2;2
BSSCwmin=4;4;3;2
BSSCwmax=10;10;4;3
BSSTxop=0;0;94;47
BSSACM=0;0;0;0
AckPolicy=0;0;0;0
APSDCapable=0
DLSCapable=0
NoForwarding=0;0;0;0
NoForwardingBTNBSSID=0
ShortSlot=1
MaxTxPowerLevel=16
IEEE8021X=0
IEEE80211H=0
CSPeriod=10
HSCounter=0
Ethifname=wl0
WdsEnable=0
WdsEncrypType=NONE
WdsList=
WdsKey=
ApCliEnable=0
ApCliSsid=
ApCliBssid=
ApCliWPAPSK=
#
Scusatemi per il post lungo, ma spero di avervi dato tutte le indicazioni.
Dall'interfaccia web del router vede i driver wireless 1.1 e l'indirizzo mac wireless ..:..:..:...:7C
p.s. è la prima volta che metto le mani in ambiente linux, ho visto che è in read only il file system....mi frega tantissimo perchè non sò dove mettere le mani. Vi prego aiutatemi. Sandro
