Changelog
v.1.1.00.21032007(.PreRelease1)
- is added the new version DSP 7.02.03.00 Release2 for Annex A.
- small corrections in the scripts of the load of system.
- is added the possibility of the installation of the maximum value of ip_.conntrack_.tcp_.timeout_.established for several days through env, on silence of 20 minutes. For example, in you telnete: echo "tcp_.timeout_.established max" /.proch/tichfg/env after this it is necessary to overload modem.
v.1.1.00.11032007(.Beta2)
- is added command unix2dos.
- is added the possibility of turning off of the conclusion of information to the cantilever port. Parameter console_.port in env. For example: echo "console_.port off" /.proch/tichfg/env - is improved the work of dynamic behavior in sheypere, for this is introduced the new parameter of the installation of the general maximum value of speed (byte per second) max Bandwidth.
v.1.1.00.27022007(.Beta1)
- is removed IGMP Proxy as useless option, for the place it is added Bandwidth Manager(.Rshaper), which makes it possible to regulate the entering speed for each ip address or networks. This sheyper includes the following options: 1. ip address or the address of network. 2. mask. 3. speed in the bytes. 4. size of turn in seconds. 5. start of dynamic speed control between all clients, who are described in the rules. Priorities are advanced with the aid of the size of turn, the less this value, the higher the priority. Dynamic behavior makes it possible to increase speed to the maximum value of channel speed, but in this case uchtyvayetsya the quantity of the users of those sitting into the given moment on the channel, the values of uniform velocity and the size of turn, the higher the speed and the less the turn, the greater the occupied strip, which will constantly change from the maximum to the values of those established in the rules. If only one person is sit on the channel, then he will engage entire channel strip, in spite of values in the rules. If in the rules is not described ip or network, then sheyper on them does not act and they work in the usual regime. If it is necessary to establish rules for the entire local network, then this must be made at the very beginning, and then already prescribed rules for the the separate ip. So one should take into consideration that the work of dynamic behavior is not very precise. - for PPPoE is added the possibility of introduction Access Concentrator Name and Service Name.
v.1.0.18.12022007()
- are added command cpu, analog of command top. Is started as cpu -.a, for the more detailed information use cpu -.h. - is removed the leakage of memory with the survey of statistics IP Account.
- is added the function of renovation dproxy after pere/podklyucheniya on PPPoA.
- is established delay pppd_.conndelay on 40 seconds.
v.1.0.18.09012007()
- are renovated modules ip_.conntrack PPTP and GRE to the new versions. New versions remove the problem of the simultaneous work of entering and emanating GRE/PPTP from one and the same machine, and so, are corrected some errors.
v.1.0.17.01012007(.Release2)
- is made optimization for the work in P2P networks.
- is inculcated checking types CPU of those utilized in modems Acorp.
v.1.0.17.26122006(.Release)
- is found and corrected the error in Wizard, which appeared after the addition of option Enable Save SID into PPPoE.
Da notare "is inculcated checking types CPU " che è il problema per cui viene verificato il tipo di CPU del modem.
