Problema accesso via telnet su 302t e altre info

  • 19 Risposte
  • 8000 Visite

0 Utenti e 1 Visitatore stanno visualizzando questo topic.

Offline theblu

  • Nuovo Iscritto
  • *
  • 23
Re: Problema accesso via telnet su 302t e altre info
« Risposta #15 il: 22 Dicembre 2005, 17:03 »
Questo il log mentre stava aggiornando con 1.2.5:
Cosa c'entra il programma che uso per il decoder ???

*******************************************
* Inizio operazioni - 22/12/2005 15.54.12 *
*******************************************
*
* CICLaMaB ver. 2.8.9
*
15.54.12  - ATTENZIONE!
15.54.12  - E'consigliato disattivare eventuali firewall e antivirus
15.54.12  - e scollegare il cavo della linea ADSL.
15.54.12  -
15.54.12  - Spegnere il modem/router e premere "Connessione".
15.54.12  -
15.54.19  - Accendere ora il modem/router.
15.54.19 x- Indirizzo IP locale: 192.168.1.2
15.54.19 x-  Indirizzo IP modem: 192.168.1.1
15.54.25  - Connessione ad "ADAM2" in corso...
15.54.25 x< 220 ADAM2 FTP Server ready.

15.54.25  - 220 ADAM2 FTP Server ready.
15.54.25  - USER adam2
15.54.25 x< 331 Password required for adam2.

15.54.25  - 331 Password required for adam2.
15.54.25  - PASS adam2
15.54.25 x< 230 User adam2 successfully logged in.

15.54.25  - 230 User adam2 successfully logged in.
15.54.25  -
15.54.25  - ---------------------------------------------------------
15.54.25  - modem/router info:
15.54.25 x> GETENV bootloaderVersion
15.54.25 x< bootloaderVersion     0.22.02
200 GETENV command successful

15.54.25  - bootloaderVersion     0.22.02
15.54.25 x> GETENV flashsize
15.54.25 x< flashsize             0x00200000
200 GETENV command successful

15.54.25  - flashsize             0x00200000
15.54.25 x> GETENV usb_prod
15.54.25 x< usb_prod              DSL-502T
200 GETENV command successful

15.54.25  - usb_prod              DSL-502T
15.54.25 x> GETENV mtd0
15.54.25 x< mtd0                  0x90090000,0x901f0000
200 GETENV command successful

15.54.25  - mtd0                  0x90090000,0x901f0000
15.54.25 x> GETENV mtd1
15.54.25 x< mtd1                  0x90010000,0x90090000
200 GETENV command successful

15.54.25  - mtd1                  0x90010000,0x90090000
15.54.25 x> GETENV mtd2
15.54.25 x< mtd2                  0x90000000,0x90010000
200 GETENV command successful

15.54.25  - mtd2                  0x90000000,0x90010000
15.54.25 x> GETENV mtd3
15.54.25 x< mtd3                  0x901f0000,0x90200000
200 GETENV command successful

15.54.25  - mtd3                  0x901f0000,0x90200000
Parametri impostati:
   - Autoload on
   - Partizionamento mtd0, mtd1 e mtd3 per D-Link DSL-300/2T
   - Salvataggio ambiente "ENV" e "config.xml"


15.56.25  - ---------------------------------------------------------
15.56.25  - SETENV mtd0,0x900a0000,0x901f0000
15.56.25 x< 200 SETENV command successful

15.56.25  - 200 SETENV command successful
15.56.25  - SETENV mtd1,0x90010000,0x900a0000
15.56.25 x< 200 SETENV command successful

15.56.25  - 200 SETENV command successful
15.56.25  - SETENV mtd3,0x901f0000,0x90200000
15.56.25 x< 200 SETENV command successful

15.56.25  - 200 SETENV command successful
15.56.25  - Le partizioni sono state modificate.
15.56.25  - SETENV autoload,1
15.56.25 x< 200 SETENV command successful

15.56.25  - 200 SETENV command successful
15.56.25  - TYPE I
15.56.25 x< 200 Type set to I.

15.56.25  - 200 Type set to I.
15.56.25  - PASV
15.56.25 x< 227 Entering Passive Mode (192,168,1,1,191,237).

15.56.25  - 227 Entering Passive Mode (192,168,1,1,191,237).
15.56.26  - RETR env
15.56.26 x< 150 Opening BINARY mode data connection for file transfer.

15.56.26  - 150 Opening BINARY mode data connection for file transfer.
15.56.26 x< 226 Transfer complete.

15.56.26  - 226 Transfer complete.
15.56.26 x- Tempo di backup: 0,05"
15.56.26  - TYPE I
15.56.26 x< 200 Type set to I.

15.56.26  - 200 Type set to I.
15.56.26  - PASV
15.56.26 x< 227 Entering Passive Mode (192,168,1,1,191,237).

15.56.26  - 227 Entering Passive Mode (192,168,1,1,191,237).
15.56.26  - RETR config.xml
15.56.26 x< 150 Opening BINARY mode data connection for file transfer.

15.56.26  - 150 Opening BINARY mode data connection for file transfer.
15.56.26 x< 226 Transfer complete.

15.56.26  - 226 Transfer complete.
15.56.26 x- Tempo di backup: 0,17"
15.56.26  - MEDIA FLSH
15.56.26 x< 200 Media set to FLSH.

15.56.26  - 200 Media set to FLSH.
15.56.26  - TYPE I
15.56.26 x< 200 Type set to I.

15.56.26  - 200 Type set to I.
15.56.27  - PASV
15.56.27 x< 227 Entering Passive Mode (192,168,1,1,191,237).

15.56.27  - 227 Entering Passive Mode (192,168,1,1,191,237).
15.56.27  - Cancellazione partizione "mtd1"... Attendere...
15.56.27  - STOR kernel mtd1
15.56.32 x< 150 Opening BINARY mode data connection for file transfer.

15.56.32  - 150 Opening BINARY mode data connection for file transfer.
15.56.32 x- Tempo di cancellazione: 5,92"
15.56.32 x- Num. blocchi da inviare: 144
15.56.38 x- Tempo di trasferimento: 5,27"
15.56.38 x< 226 Transfer complete.

15.56.38  - 226 Transfer complete.
15.56.38  - TYPE I
15.56.38 x< 200 Type set to I.

15.56.38  - 200 Type set to I.
15.56.38  - PASV
15.56.38 x< 227 Entering Passive Mode (192,168,1,1,191,237).

15.56.38  - 227 Entering Passive Mode (192,168,1,1,191,237).
15.56.38  - Cancellazione partizione "mtd0"... Attendere...
15.56.38  - STOR filesystem mtd0
15.56.51 x< 150 Opening BINARY mode data connection for file transfer.

15.56.51  - 150 Opening BINARY mode data connection for file transfer.
15.56.51 x- Tempo di cancellazione: 12,58"
15.56.51 x- Num. blocchi da inviare: 336
15.57.03 x- Tempo di trasferimento: 11,31"
15.57.03 x< 226 Transfer complete.

15.57.03  - 226 Transfer complete.
15.57.03  - REBOOT
15.57.03 x- CommandSocket: The connection is reset by remote side
          - C:\WINDOWS\Desktop\Decoder\Hummy\DSR 9500 EMU Ed42\Mswinsck.ocx Err: 10054
15.57.03 x- CommandSocket: Connection is aborted due to timeout or other failure
          - C:\WINDOWS\Desktop\Decoder\Hummy\DSR 9500 EMU Ed42\Mswinsck.ocx Err: 10053
15.57.13 x- Timeout in risposta dal modem/router
15.57.13  - Il modem/router non risponde!
15.57.13  - Attendere il riavvio del modem/router...
16.00.22  - Accendere ora il modem/router.
16.00.22 x- Indirizzo IP locale: 192.168.1.2
16.00.22 x-  Indirizzo IP modem: 192.168.1.1
16.00.23  - Connessione ad "ADAM2" in corso...
16.00.24 x- CommandSocket: Connection is aborted due to timeout or other failure
          - C:\WINDOWS\Desktop\Decoder\Hummy\DSR 9500 EMU Ed42\Mswinsck.ocx Err: 10053
16.00.34 x- Timeout in risposta dal modem/router
16.00.34  - Il modem/router non risponde!
16.00.34  - ADAM2 non risponde! Controllare l'indirizzo IP e/o
16.00.34  - seguire le istruzioni a video per spegni/riaccendi.
*******************************************
* Fine operazioni  -  22/12/2005 16.00.40 *
*******************************************

Offline marven

  • VIP
  • *****
  • 3882
Re: Problema accesso via telnet su 302t e altre info
« Risposta #16 il: 22 Dicembre 2005, 17:28 »
Mhhm... devi avere qualche problema con gli ocx. Scarica il pacchetto delle librerie dal sito di Ciclamab e installalo.

Offline theblu

  • Nuovo Iscritto
  • *
  • 23
Re: Problema accesso via telnet su 302t e altre info
« Risposta #17 il: 22 Dicembre 2005, 18:10 »
Ciao, ora sono riuscito a caricare la versione 1.2.5 ma ora succede un'altra cosa, quando cerco di cambiare la configurazione tramite web, porte e varie dopo che salvo e riavvio la configurazione si presenta come prima. Hai qualche suggerimento ?

Offline submax82

  • VIP
  • *****
  • 4621
    • sito personale
Re: Problema accesso via telnet su 302t e altre info
« Risposta #18 il: 22 Dicembre 2005, 18:18 »
NON postate lo stesso problema i 30000000 topic!!!

Offline theblu

  • Nuovo Iscritto
  • *
  • 23
Re: Problema accesso via telnet su 302t e altre info
« Risposta #19 il: 22 Dicembre 2005, 19:13 »
RISOLTO.
grazie a tutti per l'aiuto