Hello,
I'm sorry but italian is not my native tongue but I hope you can still help me.
I got from ebay an Alice Gate Voip 2 Wi fi router and I bricked it. I wanted to install openwrt on it.
It's a rather strange model, has the serial header horizontal.
I looked online for other bootlogs and it seems i have a very hard to find CFE, it doesnt say anything about AGPF, but abx3.
This is my log:
CFE FBX version 1.0.37-1.0 - prod - for abx3 (32bit,SP,BE)
Build Date: Fri Apr 24 15:13:25 CEST 2009 (nico@daria)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
__ __ _
___ / _| ___ / _| |____ __
/ __| |_ / _ \ | |_| '_ \ \/ /
| (__| _| __/ | _| |_) > <
\___|_| \___| |_| |_.__/_/\_\
dev_bcm63xx_enet.0: using EMAC2.
Initializing Arena.
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
Board mac address: 00:1D:8B:78:FE:B7
Initializing CFE networking.
polling buttons ...
## Booting using fbximagetag.
- Trying bank1 boot.
Bad imagetag magic.
- Trying bank0 boot (badbank1).
- Found valid image tag nico@daria / abx3_bank0_1.3
- Stage 1.
- Stage 2.
- Stage 3.
LZMA: Prossible old LZMA format, trying to decompress..
Entry at 0x8014f000
Closing network.
Closing DMA Channels.
Starting program at 0x8014f000
This is the only thing I get from the serial line. I cannot send anything to the device through the serial.
I also made a JTAG cable, and the alice03.exe utility cannot id the cpu, the cpuid is 00000000000000000000000.
I used this JTAG pinout:
14 DINT VREF 13
12 SRST_N GND 11
10 TCK GND 9
8 TMS GND 7
6 TDO GND 5
4 TDI GND 3
2 TRST_N GND 1
I'm stuck... any ideas?
Thanks.
